• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Castle Creations BEC question?

Wild Snapper

Rock Crawler
Joined
Aug 16, 2008
Messages
625
Location
Portland, Maine
The mini green machine needs more power in the steering.
I just picked up a CC BEC. I understand that this unit is programable via the CC patch wire. Does anyone know what this unit is pre-set at if I do not wish to reprogram. I am installing this unit so that I don't destroy the stock ESC with an aftermarket servo that apparently sucks too much power and blows up the stock Losi ESCs.

Can I install this CC BEC without reprograming it and will it work with the stock Losi ESC and an aftermarket servo?
 
Out of the box they come set to 5.1v.

It will work but you may as well crank it up to 6v."thumbsup"
 
The mini green machine needs more power in the steering.
I just picked up a CC BEC. I understand that this unit is programable via the CC patch wire. Does anyone know what this unit is pre-set at if I do not wish to reprogram. I am installing this unit so that I don't destroy the stock ESC with an aftermarket servo that apparently sucks too much power and blows up the stock Losi ESCs.

Can I install this CC BEC without reprograming it and will it work with the stock Losi ESC and an aftermarket servo?
Like someone posted 5.1 v, I wired per the sticky and am having no problems at all, esc still powers the rx, servo gets power from bec and signal only from rx, I am using a 225mg, and prob switch to a full size when that craps out.
 
Like someone posted 5.1 v, I wired per the sticky and am having no problems at all, esc still powers the rx, servo gets power from bec and signal only from rx, I am using a 225mg, and prob switch to a full size when that craps out.

X2 THIS IS EXACTLY WHAT I DID WITH CC BEC AND A 645 MG. WORKS PERFECT. I ALSO HAVE THE SAME SETUP ON MY 2.2 3 MONTHS WITH NO ISSUES.
 
This is great to hear guys, I was dreading having to buy a Tekin FX just to get my mini to run with a more powerful servo. This Castle Creation BEC is going to be a great fix and it was only $20 at my local shop. "thumbsup"
Any other info on peoples' success with this setup or any helpful details of their experience could be helpful.
 
Back
Top