Cheap/ easy upper link mounts

[tjscrogins99]

I've been building a WK crawler and did not want to wait for the tlt link mounts to come back in stock so I just made upper link mounts out of 1/4 inch aluminum square tube($2 worth could make 10 sets of link mounts).

Just cut it to length I think mine were 3/4 of an inch,

drill holes to mount it to the axle(the middle two holes that the old 3 link mount used) and

drill holes going the other way through the tube to attach your upper links to.

I made made more than one set of mounting holes (the holes going parrallel with the axle) so I could easily change my drive line angle and wheelbase if needed. Ive got pictures on my comp but cannot figure out how to post them. I can email them if anyone is interested.

 

[EeePee]

I'm in Columbus.

You can buy a star and help support our forum, enter giveaways, and upload pictures directly off your computer.

Or, use www.imageshack.com or www.photobucket.com to host your pictures.

 

[tjscrogins99]

Send me a pm if you ever want to go crawling. I have a couple of cool places in southern ohio that I want to try. Know any good places around us? I live just out east.

 

[elbo]

Im in newark, waiting on my WK to get to my LHS...but i have a droop scaler and a toureg ready for some action...let me know if you guys get together. i hear they are building a huge RC crawling park in Zanesville!