****Chit Chat Thread****

[xzk7nr]

Happy B-Day Al!

 

[saul]

hey thanks all..

anyway on another note


i have all the bits and pieces for my scaler project except


need links
need rod ends
need bondo


and then i can start building

 

[shrek]

happy birthday al.

 

[hitman46mod]

I need to find better things to do with my time. And who knew I could sew.;-) And Iron Man was the only Bad Ass who could drive it.8)

 

[hitman46mod]

Who's duh Man...!?! IROMMAN & Who's "Water-Proof"... Hitman ...Very good work Sir..... dammmm good work indeed .!!!"thumbsup" P.S. Is IRONMAN "Water-Proof" too:?:

I sure hope so.:lol: Scooter, you going to the Twisted comp?

 

[saul]

damn nice



i dont think i can afford to drive to twistted on sunday as i spent way to much gettin the new chevy going

but i may make a run at mill race pond just to make sure the chevy is comp worth for next week

round noon?

if any scaler guys that are not going to twisted meet want to go on a scale fun run at race park on sunday


how about noon

 

[hitman46mod]

damn nice



i dont think i can afford to drive to twistted on sunday as i spent way to much gettin the new chevy going

but i may make a run at mill race pond just to make sure the chevy is comp worth for next week

round noon?

if any scaler guys that are not going to twisted meet want to go on a scale fun run at race park on sunday


how about noon

Damn, time conflict.:x

 

[twistedone]

these rules need to be addressed by the Michigan boys

when you dnf you get 40 points minus the gates you cleared

driver touching the rig it is the judges job in some cases

when you reposition you go back to last gate cleared ?I think we have done this in the past

gate markers are 10 points and there are 2 per gate so you can get 20 points on a single gate

just some things that need to be re-read in the rules and we all run the same I think

 

[twistedone]

Now, let 's see now what all we got in duh bag here. been shopping today and got some damm good deal 's too = Integy Indi I6Xz Pro charger. AC/DC Tc4 B4 T4 =30.50 cash, and 10 pair of Dean plug's = free shipped HongKong airmail.. take about 7 to 20 working day's too get here thou, andKyosho Motor Checker "brand new" still in unopened box = 15.99 cash, and one custom made Front wheel drive puller =23.00 as is... 5 futaba receiver's,and a couple of transmitter's = 12.00 cash, 6 clod modified motor's don't know off hand what turn's they are ..but none are stocker's= 12.00 cash,and looking way down in duh bottom of that same bag we pull outta a IRP Speedo= 15.00.. that maybe going back too not sure yet. plus about 6 other mix & match motor's too now #1 grand son could ya kindly pass that box with duh pretty new charger & and that do gooder motor thingy to me ;-) and the rest is your sonny boy ... plus ya can have them 7 = 7.4 v pack's for your junk hand me back that "REEDY" one I get that one .. "fair deal" now let get to messing & tinkering a bit before ya got to hit the sack ..... yup, Reckon me & him had a good day too hope you all's did too:roll: p.s. just a waiting on My black widow & two pair's of Panther''s tire's/foam's now............... and I'll, be sitting pretty..!!! I can drive too lol there's a kool spot over by Deckerville we found too Scoot'er

What exactly are you saying here scoot I cant make any sense of it at all :shock::shock:

 

[Miller Tyme]

these rules need to be addressed by the Michigan boys

when you dnf you get 40 points minus the gates you cleared

driver touching the rig it is the judges job in some cases

when you hit a gate you go back to last gate cleared

gate markers are 10 points and there are 2 per gate so you can get 20 points on a single gate

just some things that need to be re-read in the rules and we all run the same I think

Hitting a gate does not take you back, only a reposition takes you back to rear wheels at the exit of the last cleared gate. Gates are live for time of the entire course cleared or not.
Farmer is gonna wanna brush up real good hate to loose points at Battleground or Nats due to a misunderstanding.

You guys did a great job, I think there may be a few of us considering making the trek up for the Mi. State Comp.
Perhaps we'll see you between now and then.

 

[Farmer]

I was pretty sure thats how the rules were the last comp with MiRCa at Davis burg. Thanks for the heads up"thumbsup"


Later Farmer

 

[twistedone]

I said "I" just got me a 10 pair's of dean's plug's for FREE shipped from hong kong, one brand new Kyosho motor checker for 15.59 cash, one used IRP speedo + Reedy 19t motor with TC3 heatsink HPI for 22.50, one like new Integy Indi 16Xz Pro battery charger ac/dc Tc4 B4 T4 for 30.55, plus 6 clod modified turned motor's & two puller motor's for 12.00 , and 5 good used 7.4v stick pack's for 12.50 and one's was a blank shrink wraped REEDY3200... too, not bad for a sunday Drive and found a "sweet crawling spot" over by Deckerville too = Can ya read that now:roll: Now I'm, just waiting on my black widow, & two pair's of Panther's tire's & foam's ..... Then I should be sitting "pretty"............ Scoot'er"thumbsup"

ok so you paid someone for that stuff Im sorry I can see a use for the chassis and tires but thats about it
are you going to open a antique shop or just a museum!!!!!

 

[twistedone]

Im just giving ya shit cause I can :roll::roll::ror::ror:

 

[jeepfreek]

Well guys I'm off work for the rest of this month and some of August, Again! This week Nick is helping out with girlscout camp with his mom and sisters but next week we might want to hook up and play around. Maybe some of you guys might even want to go fishing, tubing, drinking or something? Drop me a pm if your interested! I'll check back in periodicly today but some of you have my phone # so feel free to call me.

 

[twistedone]

dig is in and burned up my first servo setting it up got to love the end point game "thumbsup""thumbsup""thumbsup""thumbsup"

 

[JUSTGOINGSLOW]

dig is in and burned up my first servo setting it up got to love the end point game "thumbsup""thumbsup""thumbsup""thumbsup"

Bob, those are a little tricky are'nt they, But I'm sure you'll get it.

 

[twistedone]

how did you manage to do that Bob...!?! just asking:rolluch I bet that was no cheap servo either , huh

not to bad 30.00 bucks but wish i got it the first time

Bob, those are a little tricky are'nt they, But I'm sure you'll get it.

Yes I called in back up called Farmer and Tim is next I or we will get it or die trying

 

[JUSTGOINGSLOW]

Yah, they work really good once you get them all figured out.

 

[binaryterror]

Bobby, mine has been perfect.

Dial the End Points way low...like 40%. Worked perfect from there, heck my servo don't even warn up on 6.4v.

More importantly hows the operation of the sliding? Also be sure to check for bind in the rear driveshaft...that can cause problems.

 

[twistedone]

Bobby, mine has been perfect.

Dial the End Points way low...like 40%. Worked perfect from there, heck my servo don't even warn up on 6.4v.got that done now

More importantly hows the operation of the sliding? Also be sure to check for bind in the rear driveshaft...that can cause problems.

checked this seems to be fine im using my pede shafts the mips are too heavy,too long and overkill

thanks for the help guys I need it