CreationFab Now Takes Trade In's!!!

[Chris_The_Battery_Man]

That's right, CreationFab is now taking "Trade-In's""thumbsup"

Since I love to barter, and like to have plenty of parts on hand, we will now be accepting trades on things that can be used. Not all trades will be accepted, but this opens the doors to folks that may be short on cash, but have something useful to trade. Below is a list of items that I am looking for. You're welcome to PM me about something I dont have on the list, but dont let your feelings get hurt if I say no.

This offer is open to VENDORS also!


I will update the links and list as often as I can/remember"thumbsup"

Items I am taking in on trade:

Berg:
-Trans cases
-Upper link mounts
-Tubes
-Gears/lockers
-Lower link mounts
==NO STOCK SHAFTS, DOGBONES, OR KNUCKLES===

Axial:
-AX10/SCX10 Axles or housings
-Wraith/Ridgecrest axles or housings
-XR10 axles
-XR10 or Wraith universals or straight rear axle shafts
-XR10 or Wraith knuckles, chubs, or lockouts
-AX10 transmissions
-SCX10 shocks
-VP hop up parts for XR10 or AX/SCX10 axles
-Axial over/under drive R&P's for the wraith/scx10 axles


Suspension:
-Traxxas Big-Bore shocks
-Mini-T springs
-Jeepindoug delrin mini-t spring cups
-Lunsford TI links(may accept some bent links)


Wheels/tires:
-Crawler Innovations double deuce closed cell foams
-Boss claws
-HPI Blitz wheels(new)
-VP SLW's
-VP hubs for SLW's

Electronics:
-FXR's
-Mamba Micro Pro's
-Mamba Micro Sidewinders
-CC BEC's
-Holmes motors
-Strong servos over 300 oz-in.(would love a few more Futaba's)
-Nomadio React and receivers
-Spectrum land DSM1 receivers



Here are all the threads that I have active as of now for the goods/services I offer:


Of course you can just visit my site:

CreationFab - Crawler Accessories and Custom soldering Services

http://www.rccrawler.com/forum/enroute-berg/393304-coming-soon-1-piece-rear-delrin-tubes.html

http://www.rccrawler.com/forum/axia...new-creationfab-premium-delrin-tubes-===.html

http://www.rccrawler.com/forum/axial-xr10/393114-creationfab-gear-milling-service.html

http://www.rccrawler.com/forum/veno...n-tubes-put-xr-shafts-ax10-r-p-your-axle.html

http://www.rccrawler.com/forum/vendors-electronics/327111-official-custom-esc-wiring-thread.html

http://www.rccrawler.com/forum/axle...0-tubes-=new-styles=-*now-taking-orders*.html

http://www.rccrawler.com/forum/vendors-electronics/326148-receiver-bypass-adapter.html

http://www.rccrawler.com/forum/chas...ionfab-rd1-carbon-fiber-bodiless-chassis.html

http://www.rccrawler.com/forum/enroute-berg/378864-berg-tube-splining-service.html

http://www.rccrawler.com/forum/axle...bs-pre-fabbed-ax-10-xr-10-hybrid-housing.html

http://www.rccrawler.com/forum/chas...nfab-delrin-scx10-upper-spring-retainers.html

http://www.rccrawler.com/forum/chassis-suspension/382945-creationfab-custom-chassis-alike-parts.html

http://www.rccrawler.com/forum/axia...dth-ax10-delrin-tube-*now-taking-orders*.html

http://www.rccrawler.com/forum/tools-supplies/232089-stainless-3mm-screws.html

http://www.rccrawler.com/forum/vend...ton-head-hardware-kits-axial-losi-wheels.html

http://www.rccrawler.com/forum/tires-wheels/360347-axial-wheel-replacement-hardware-kits.html

http://www.rccrawler.com/forum/tires-wheels/330717-slw-hardware-sets.html

http://www.rccrawler.com/forum/tools-supplies/344701-stainless-steel-screw-sets-vanquish-wheels.html

 

[doublej]

Props to you Sir! That is a wonderful idea - I might just have to send you a PM here shortly.

 

[Chris_The_Battery_Man]

Thanks to all the folks interested and sending me PM's!


Before too long, I will be able to open a second hand RC store:lmao: