Frigid River Venture
Rock Stacker
this is easy and cheap
here is what you need
razor hoders
ca glue
styrene
and some kind of filler I used JB quick
remove one of the holders from the package
take a small piece of styrene and slide it into the holder
draw a line around the opening
cut out the piece and test fit it
cut the top off and tape it in the spot
glue it in and set it aside
now cut a small strip of styrene then cut in into 6 pieces 4 small 2 long
glue then to the holder one on each side near the top
cover the seam with filler and go build something till it is dry or build a second one to this point
now that all is dry sand it all smooth
sand off the extra on the handles
mask off the top
paint it what ever color you want I went with red when it is dry remove the tape and there it is a cooler
my masking was bad but it looks like a cooler the lid opens and it has a built in latch
hope this is helpful
here is what you need
razor hoders
ca glue
styrene
and some kind of filler I used JB quick
remove one of the holders from the package
take a small piece of styrene and slide it into the holder
draw a line around the opening
cut out the piece and test fit it
cut the top off and tape it in the spot
glue it in and set it aside
now cut a small strip of styrene then cut in into 6 pieces 4 small 2 long
glue then to the holder one on each side near the top
cover the seam with filler and go build something till it is dry or build a second one to this point
now that all is dry sand it all smooth
sand off the extra on the handles
mask off the top
paint it what ever color you want I went with red when it is dry remove the tape and there it is a cooler
my masking was bad but it looks like a cooler the lid opens and it has a built in latch
hope this is helpful
