ECX Temper Gen2

[cmoore923]

Hey all,
New here but I picked up a Temper at the LHS and have a few questions. Out of the box was surprising good for the low price. Did a few little adjustments & plan to do a few upgrades. First has to be the servo though it is very sluggish & weak. So my question is what servo to get? It’s a standard size servo and I would like it to be waterproof since that is how they come. How do I know what voltage to get? & would upgrading to a 2s LiPo affect which one I get? Thanks in advance, & sorry if there is already a thread on this somewhere, link it below if there is!


Sent from my iPhone using Tapatalk

 

[Bard]

For some reason I can't find the other thread. But there is a good one with plenty of info for you on this. I have enjoyed mine. The stock electronics are junk. So if you start upgrading 1 part, you start doing them all.

One big thing is tear it down and make sure all the gears are lubed.

 

[Bard]

And it needs weight. I weighted all the wheels which helped.

 

[Stomp]

Here is the Temper G2 Thread. Lots of info there.

http://www.rccrawler.com/forum/general-crawlers/608291-ecx-temper-gen-2-a.html