Esc help!!!!!

[mud_life_19]

I have a Mamba max pro in my scx10 and it will power up and steering works fine, so it won't give me the final ring for recognizing that the radio is connected, PLEASE HELP ANYTHING WILL HELP ME FIX IT I WANNA HEAR SUGGESTIONS

 

[cartronicshn]

Make sure that all your trims are at zero and non of the tx channels are reversed, then do the basic esc calibration on your castle instruction manual.

 

[rcscaler]

well, I also have same problem two days when I want to calibrate with DX3R radio on my new rig.
at that time, MMP had a green light on, but the throttle did not work at all.

so, what I did is turn off radio, unplug battery first.
Then turn the radio on, hold full throttle, then plug in/turn on the ESC. When it beeps, push to full reverse. When it beeps again, let it sit at neutral.

 

[Charlie-III]

Make sure that all your trims are at zero and non of the tx channels are reversed, then do the basic esc calibration on your castle instruction manual.

Some radios (like the Futaba) seem to like the throttle channel reversed. You may need to reverse the motor wire colors to get rig forward when you pull the trigger.

To calibrate, throttle trim at "0", throttle EPA's at 100%, TX on, full throttle, power ESC, wait for chime, full reverse, wait for chime, done.

CC manual..... Castle Creations | FAQ: 1/10th Scale Products

 

[mud_life_19]

got it!! thanks