EvilTwin v2
I wanna be Dave
Introducing the ECD knuckle weight system for VP Wraith knuckles.
These use are made from 1/4" delrin and are hung from a .125" G10 piece on each side that also include steering arms or a support without arms. These use the Pine Car Derby weights available from Tower: TowerHobbies.com | PineCar Tungsten Incremental Cylinder Weights 3oz
Unlike previous weight systems that used these Tungsten weights, this one fits tightly inside the wheel.
I will get better pictures as soon as I can, but here is what I have so far.
Here's a bracket with long and short steering arms:
Here's one with a short side only:
Here it's sitting flush in a ECD 1" G10 glue-on wheel with 350 VP hub:
with a full size VP DH1 wheel with 350 hub:
view without wheel:
System Includes:
- 2 - .25" thick delrin weight holders
- Support brackets with your choice of 2 zero ackerman steering arms (either long on both sides, short on both sides, long on one and short on one side, long on one side & nothing on other, short on one side & blank on other, or no arms (weight support only). (I am also working on an option that allows more steering, but is not zero ackerman.)
Pricing:
$35 + $7 shipping per order for US orders.
Add $10 for colored steering arms (blue, green, red, yellow, pink, orange, white, gray, etc.) (Custom colors may add a few weeks to the time to process the order due to not stocking all colors.
----------------------------------------------------------------------------------
Please, if anybody needs to contact me, email me at EvilCrawlerDesigns@comcast.net.
I'm getting so many pm's that it's hard to keep track of them as there's no good sort function. Once people drop to the 2nd or 3rd page, it's too easy to forget about them. Through email, I can easily keep track of contacts and merge requests into a spreadsheet to keep orders straight
Last edited:
