2006Shelby
Quarry Creeper
Ok well like the tile says this is my first MRC pro
List of Parts:
Fubar Mini Skeeter Chassis
Home Made Solid Brass links
30* hr Rear lower links
Hitech 7955 servo
B1R esc
10 amp Bec
HH mini motor
Narrowed axial 8 hole 1.9
HB rovers
HR alum Chub Kucklers and hexs
Overdrive front
Broken Trans atm striped a metal locker ( Well wife striped it not knowing how to play with one )
Stock alum shocks sitting at full droop with mini t springs ( looking for suggestions on this set up)
Metal yoke drive shafts
Fs-gt3b rx/tx
Turnigy 800mah 30c 2s lipos
CVD's up front also
Steel front and rear lockers.
Looking for any suggestions
List of Parts:
Fubar Mini Skeeter Chassis
Home Made Solid Brass links
30* hr Rear lower links
Hitech 7955 servo
B1R esc
10 amp Bec
HH mini motor
Narrowed axial 8 hole 1.9
HB rovers
HR alum Chub Kucklers and hexs
Overdrive front
Broken Trans atm striped a metal locker ( Well wife striped it not knowing how to play with one )
Stock alum shocks sitting at full droop with mini t springs ( looking for suggestions on this set up)
Metal yoke drive shafts
Fs-gt3b rx/tx
Turnigy 800mah 30c 2s lipos
CVD's up front also
Steel front and rear lockers.







Looking for any suggestions
Last edited: