Gearing down???

[Crawler downunder]

Howsit crawlers, I have a TLT-1,and been on the modafy buzz, I have put some lenght into it, locked all 3 diffs, just want to know what a good gear size to use, I have read a 10 tooth and a 90 tooth spure gear is ok, If any body can help someone downunder please do so,

Thanks and Rockon8)

 

[BENDER]

Moved to Newbie.

Are you running a Stampede tranny? If so, with a 55t lathe motor alot of guys run around a 14t pinion and 87t spur gear. I run a 12t pinion with an 84t spur.

 

[Crawler downunder]

Hay thanks mate, will look into those sizes, not sure of the tranny, think its just a standed TLT one . hope to get some photos up soon.

 

[Crawler downunder]

geared down

Have found a 18 tooth pinion, much better than the standed 24. but will prob go smaller still. Have a pic , follow linkhttp://www.zshare.net/image/21-jpg-p82.html
http://www.zshare.net/image/31-jpg-a36.html
http://www.zshare.net/image/11-jpg-8cf.html

Will post more soon

 

[Crawler downunder]

Have some pics now

Will be posting more soon, just crawling around some wood that i pinched from the building site next door

 

[whalebone]

If its the stock tranny i ran a 12t pin and a 96 spur it worked great really slow

 

[Crawler downunder]

Thanks mate, will check it out, if i could gear my crawlwer as slow as the local hobby shop i would be very happy ha ha ha, Thanks