Giveaway - JC Auto Design Scale Tech Disk Brake Spacers

[Perkolator]

awesome parts! thanks for doing the giveaway!
if I won, they'd go on one of these works in progress "thumbsup"

 

[monkeyracer]

The giveaway is almost over! Get your entries in by midnight 4/30 (Mountain Time)

As a reminder, check the first post for entry rules, a picture is required to be considered a valid entry.

Here's a quick pic of one of the brakes that will be given away:

Currently the odds of winning are about 1 in 8; Good luck everyone!

 

[monkeyracer]

The giveaway is now closed.

Thank you to everyone that entered. Winners will have PM's very soon.

The picture winner is:

thanks for the chance."thumbsup"

The rig is well done, unique, and the picture shows it off well. You will be getting first pick on which thickness you would like.


The random winners are:
joshsmith512
Hwheeler73
sickcivic95
Honchoforever1

Congratulations to all the winners!

 

[Hwheeler73]

The giveaway is now closed. Thank you to everyone that entered. Winners will have PM's very soon. The picture winner is: The rig is well done, unique, and the picture shows it off well. You will be getting first pick on which thickness you would like. The random winners are: joshsmith512 Hwheeler73 sickcivic95 Honchoforever1 Congratulations to all the winners!

WOOHOO! Thank you for the contest! After I get them installed I'll send you a picture for advertising!

 

[joeyf]

Wow!!!! That is awsome. Thanks again for the giveaway. "thumbsup"

 

[joshsmith512]

thanks monkeyracer"thumbsup"

 

[sickcivic95]

Woot woot I won something. These will look killer on my rig..

--Dan

 

[Honchoforever1]

Woo hoo"thumbsup" I finally won a giveaway!

Thanks monkey racer!

 

[monkeyracer]

Prizes going out today:

Again, congratulations to the winners!

Keep an eye on the vendor thread (linked in the first post) The pre-order will be opening very soon.


Here's a little better pic of the brakes:

 

[Honchoforever1]

Got my rotors today"thumbsup" they work and fit very nice! Thanks again!

 

[Hwheeler73]

I'm sorry it took so long to get this posted up on here. I finally got home and picked these up! I'm very happy with them! 1st off, I am comparing them to a set of VP aluminum rotors. I like the fact that the Scale Tech rotors are a smaller diameter! In my opinion, the VP's are too big. Again, it's just my opinion, but as far as scale looks go, the diameter of the Scale Tech rotors looks much more scale. Fit and finish is perfect! I even think the not so shinny finish is more realistic. Thank you for the giveaway! And I'm glad I was chosen as one of the winners!

 

[fr8cture]

I'm sorry it took so long to get this posted up on here. I finally got home and picked these up! I'm very happy with them! 1st off, I am comparing them to a set of VP aluminum rotors. I like the fact that the Scale Tech rotors are a smaller diameter! In my opinion, the VP's are too big. Again, it's just my opinion, but as far as scale looks go, the diameter of the Scale Tech rotors looks much more scale. Fit and finish is perfect! I even think the not so shinny finish is more realistic. Thank you for the giveaway! And I'm glad I was chosen as one one of the winners

Those look great on the motoworx, I need to get some.

Sent from my LG G2

 

[GEISSE-RC]

thanks for the giveaway!!!

Sent from my XT1080 using Tapatalk

 

[Crawllife]

They would look sooooo sweet on my all vp wraith. Thanks for the chance!


Sent from my iPhone using Tapatalk