STANG KILLA SS
~THE SCALE SHOP~
sweet jesus :shock:
Mansory does some incredible work, and with this Aston Martin DB9 they transformed it completely with a ridiculous amount of carbon fiber dubbed the Cyrus. There’s no doubt the idea came from their previous work and accomplishments on the Bugatti Veyron Vincero and Bugatti Veyron Linea Vincero models. Their work is amazing and one of the most stunning Aston Martin DB9 models we have ever seen. The car was recently released at the Frankfurt Auto Show and received the attention it deserves. It was completely re-done with all carbon fiber for every piece of the body. Except the rear fenders which couldn’t shape the carbon fiber accordingly, Mansory glued on carbon fiber panels that are two inches wider with adhesive exclusively from Lamborghini.
Along with the mind-blowing body work, Mansory also added 28 hp to the Aston Martin DB9 with some simple engine and ECU tuning. Adding to the exterior customizations are 20 inch alloy wheels in the front, and 21 inch alloys in the rear. The interior received extra aluminum and carbon fiber pieces with the Cyrus title stitched into the headrests. You know that all this carbon fiber will not come cheap, and Mansory has priced the Aston Martin DB9 at 380,000 euro! From the factory the stock Aston Martin V12 goes for 124,000 euro.
For an additional $560,000 to spend in order to transform your $200,000 DB9 into a $1.4 Million dollar look alike, despite the rediculousness of spending almost three times as much money modifying a car as you do purchasing it the math does work out, that even leaves some money left over to pick up a Jaeger-LeCoultre.
Mansory has upgraded the DB9’s suspension with a set of adjustable coil overs and a rather large set of rims to house wider rubber. The exterior of the Mansory Cyrus is both powerful and aerodynamic incorporating flared fenders, side skirts as well as a lightweight hood with larger vents and a One-77 inspired front bumper while the rear skirt is upgraded with an integrated diffuser and four stainless steel tail pipes.
The exhaust system amongst a few other tricks has raised the DB9’s output by 28 HP, bringing it up to almost 500 while the interior gets extra helping of racy lightweight materials like aluminum and carbon fiber.
The car squats on large 9x20 front and 10.5x21 rear ultra-forged rims wrapped in 255/30ZR20 front and 295/25ZR21 rear Dunlop Sport Maxx tyres. The coilover suspension has been adjusted to lower the centre of gravity and improve road holding.
Mansory's definition of luxury extends to the interior where tailor-made carbon fibre parts are found. They include some bits from the dashboard, the centre console and the re-designed steering wheel. Foot pedals are made of aluminium while the door sills and head rests feature embroidered CYRUS logos. Hand-stitched leather covers the seats, parts of the dashboard and inside the door panels.
Mansory does some incredible work, and with this Aston Martin DB9 they transformed it completely with a ridiculous amount of carbon fiber dubbed the Cyrus. There’s no doubt the idea came from their previous work and accomplishments on the Bugatti Veyron Vincero and Bugatti Veyron Linea Vincero models. Their work is amazing and one of the most stunning Aston Martin DB9 models we have ever seen. The car was recently released at the Frankfurt Auto Show and received the attention it deserves. It was completely re-done with all carbon fiber for every piece of the body. Except the rear fenders which couldn’t shape the carbon fiber accordingly, Mansory glued on carbon fiber panels that are two inches wider with adhesive exclusively from Lamborghini.
Along with the mind-blowing body work, Mansory also added 28 hp to the Aston Martin DB9 with some simple engine and ECU tuning. Adding to the exterior customizations are 20 inch alloy wheels in the front, and 21 inch alloys in the rear. The interior received extra aluminum and carbon fiber pieces with the Cyrus title stitched into the headrests. You know that all this carbon fiber will not come cheap, and Mansory has priced the Aston Martin DB9 at 380,000 euro! From the factory the stock Aston Martin V12 goes for 124,000 euro.
For an additional $560,000 to spend in order to transform your $200,000 DB9 into a $1.4 Million dollar look alike, despite the rediculousness of spending almost three times as much money modifying a car as you do purchasing it the math does work out, that even leaves some money left over to pick up a Jaeger-LeCoultre.
Mansory has upgraded the DB9’s suspension with a set of adjustable coil overs and a rather large set of rims to house wider rubber. The exterior of the Mansory Cyrus is both powerful and aerodynamic incorporating flared fenders, side skirts as well as a lightweight hood with larger vents and a One-77 inspired front bumper while the rear skirt is upgraded with an integrated diffuser and four stainless steel tail pipes.
The exhaust system amongst a few other tricks has raised the DB9’s output by 28 HP, bringing it up to almost 500 while the interior gets extra helping of racy lightweight materials like aluminum and carbon fiber.
The car squats on large 9x20 front and 10.5x21 rear ultra-forged rims wrapped in 255/30ZR20 front and 295/25ZR21 rear Dunlop Sport Maxx tyres. The coilover suspension has been adjusted to lower the centre of gravity and improve road holding.
Mansory's definition of luxury extends to the interior where tailor-made carbon fibre parts are found. They include some bits from the dashboard, the centre console and the re-designed steering wheel. Foot pedals are made of aluminium while the door sills and head rests feature embroidered CYRUS logos. Hand-stitched leather covers the seats, parts of the dashboard and inside the door panels.
Last edited:
