has any one tried the Tactic TSX107 micro servo?

[8000ft]

As stated above, I am tired of the crap Traxxas diff and shift servo...complete junk gears.
I am looking for a new option. I see the Blue Bird option but coming from Hobby King it will take a while to get here so I was looking for an Amazon Prime option and came across the Tactic TSX 107. I was one of the very few 25 spline micro servos that I have found.

 

[83trekker83]

Ive read as much as i can on this with no anwser.

I think the main proble with using other servos is not being able to set end points. I hope somebody comes up with sometghing.

 

[JDXX]

Ive read as much as i can on this with no anwser.

I think the main proble with using other servos is not being able to set end points. I hope somebody comes up with sometghing.

They already have,


https://www.google.com/url?sa=t&rct...channel.html&usg=AOvVaw3qMESXusPnmB8S5bd3vZk6

 

[83trekker83]

They already have,


https://www.google.com/url?sa=t&rct...channel.html&usg=AOvVaw3qMESXusPnmB8S5bd3vZk6

Does it have to stay wired in to the servo? If so pretty expesnsive if you need 3 of them for diffs and 2 speed tranny.

 

[Inspector86]

The TRX4 shift servos are not as bad as people claim. Yes they are small and weak but they only have to move a light weight linkage and if you set the servo savers correctly per the TRX4 manual they work just fine. I have four TRX4s now and maintain a 5th TRX4 belonging to a neighbor with over 500 total run time hours. Over the past 16 months I have replaced exactly one 2065 servo and that one was my mistake.

 

[JDXX]

I used full size servos in my rig with a four channel radio. With a two speed, Castle aux wire and two diff lock servos it was my only choice besides buying a new 6 channel radio. Not bad for 70 bucks and they work great.

 

[83trekker83]

Yes.


Buy a better radio with EPA for all channels. "thumbsup"

Can you suggest a radio? I have no clue what so ever about radios on these trucks.

 

[heyok]

A radio with all the adjustments is a great thing to have. There is another option for you to consider:
http://www.rccrawler.com/forum/vend...-end-point-adjuster-two-position-channel.html
Or
http://www.rccrawler.com/forum/vend...winch-diff-locker-controller.html#post5830100