Heres a list of reversable ESC's

[TwistedXT]

I figured i would throw this together to kinda help everyone out... me included

Novak Super Duty XR ESC (6-14 cells)
SPECS: Voltage input: 6 to 14 cells (7.2-16.8V) On-resistance:0.0011 ohms
BEC voltage: 6.0v/3A Weight: 4.03oz (114 g)
Maximum current: (forward) 400A (reverse) 180A
Case size: 1.75" x 2.17" x 0.85" Rx wire length: 10.5"
Batt wire length: 7" (both) Motor wire: 13"
Wire Gauge: 14 Yellow (+), Blue (-)
Single motor limits @ 6 cells: None
Single motor limits @ 10 12 or 14 cells: None (550 size only)
Dual motor limits @ 6 cells: 10 turns
Dual motor limits @ 10 cells: None (550 size only)
Dual motor limits @ 12 and 14 cells: 12 turns (550 size only)
Price : 139.99

This is the Tekin Rebel 2 Electronic Speed Control.

SPECS: Controls: Forward/Brake/Reverse
Input Voltage: 4-10 Cells (Stock Motor) 4-8 Cells (Mod Motor)
On resistance: 0.0038
Frequency: 2000Hz
Power Wires: (4) 15 Gauge Silicone
Plugs: Tamiya/Bullet
BEC: 6.0V / 5.0A
Weight (with wires): 2.4oz (68g)
Size: 1.8" x 1.4" x 1.0" (46mm x 35mm x 25mm)
Motor Limit: 10 Turn (6 cells)
price : 79.99

This is a Traxxas XL1 Electronic Speed Control with Reverse
This speed control handles 17 Turns and above.

SPECS: Cells: 4-7 Weight: 3.4 oz
Amps Continuous: 75 Amps Peak: 100
Dimensions including heatsinks: Voltage Drop: 0.019
2.4" long x 1.5" wide x 1.4" high
Price 39.99

This is the Traxxas XL-10 Forward and Reverse Electronic Speed Control.
4-7 cell operation for electric vehicles.
SPECS: On Resistance Forward: 0.006 Ohms
On Resistance Reverse: 0.006 Ohms
Peak Current-Fwd/Rev: 150A/150A
Braking Current: 75A
Continous Current: 30A
BEC Voltage: 6.0VDC
BEC Current: 1000mA
Power Wire: 14GA / 5"
Input Harness Type: 26GA / 9"
Transistor Type: MOSFET
PWM Frequency: 2000Hz
Thermal Protection: Thermal Shutdown
Single Button Setup: Yes
Motor Limit: 10T (540 Size)
Input Voltage: 4-7 Cells (4.8V to 8.4V DC)
Weight: 2.26oz
Profile Selection: 100% FWD, 100% Brakes, 100%REV
100% FWD, 100% Brakes, No REV
100% FWD, 100% Brakes, 25% REV
Price 62.99

This is the LRP Runner Plus Digital Speed Control with Reverse.
SPECS: Voltage Input: 4-7 cells (4.8-8.4V)
On Resistance: 0.017 ohms
Rated Current: 80 Amps
Max. Current(30 sec.): 40 Amps
Cont. Current(5 min.): 20 Amps
Motor Limit: 18+ turns
PWM frequency: 1250 Hertz
Weight: 55 grams
Lenght: 40mm
Width: 40mm
Height: 15mm
Price : NA

This is the LRP Associated Quantum Reverse 2 Super Electronic Speed Control.
For brushed motors 15 turns and above.
SPECS: Length: 1.02" (26mm)
Width: 1.02" (26mm)
Height: 0.62" (15.7mm)
Weight: 0.58oz (16.5g) without wires
Voltage Input: 4-7 cells (4.8-8.4V)
Typical Voltage Drop: 0.075V @ 20A
Rated Current: 50A
Motor Limit: Over 14 turns
B.E.C. 5.0V
Price $86.99

This is the LRP Associated Quantum Reverse 2 Pro Electronic Speed Control.
For brushed motors 12 turns and above.
SPECS: Length: 1.02" (26mm)
Width: 1.02" (26mm)
Height: 0.62" (15.7mm)
Weight: 0.60oz (17g) without wires
Voltage Input: 4-7 cells (4.8-8.4V)
Typical Voltage Drop: 0.060V @ 20A
Rated Current: 65A
Motor Limit: Over 11 turns
B.E.C. 5.0V
Price $119.99

This is the LRP Associated Quantum Reverse 2 Bullet Electronic Speed Control.
For brushed motors 8 turns and above.
SPECS: Length: 1.02" (26mm)
Width: 1.02" (26mm)
Height: 0.62" (15.7mm)
Weight: 0.63oz (18g) without wires
Voltage Input: 4-7 cells (4.8-8.4V)
Typical Voltage Drop: 0.050V @ 20A
Rated Current: 75A
Motor Limit: Over 7 turns
B.E.C. 5.0V
Price $149.99

This is the Associated AI Super Reverse Electronic Digital Speed Control
SPECS: Length: 1.7" (42.5mm)
Width: 1.7" (42.5mm)
Weight: 1.7oz (47.5g) excluding wires
Voltage: 4.8v-8.4V, 4-7 cells
Typical Voltage Drop @20A: 0.160V
Rated Current: 120A
Motor Turn Limit: 14 turns and above
BEC: 5.0V
High Frequency: Yes
Fail Safe System: Yes
Multi-Protection System: Yes
Connectors: Standard Tamiya style
Setup: Automatic
Price 54.99

This is the Associated LRP Pro Electronic Speed Control with Reverse.

SPECS: Voltage Input: 4-7 cells (4.8V-8.4V)
Typical Voltage Drop @20A: 0.107V
Rated Current: 180A
BEC: 5V
Case Size: 1.67" x 1.67" (42.5mm x 42.5mm)
Weight: 1.79oz (51g) without wires
Price 69.99

This is the Associated AI Bullet Reverse Electronic Digital Speed Control.

SPECS: Length: 1.7" (42.5mm)
Width: 1.7" (42.5mm)
Weight: 1.8oz (51.0g) excluding wires
Voltage: 4.8v-8.4V, 4-7 cells
Typical Voltage Drop @20A: 0.048V
Rated Current: 225A
Motor Turn Limit: None
BEC: 5.0V
High Frequency: Yes
Fail Safe System: Yes
Multi-Protection System: Yes
Connectors: Standard Tamiya style
Setup: Automatic
Price 89.99

This is the DuraTrax IntelliSpeed Fwd/Rev AutosportSpeed Control for
stock motors from 18 turns up, and 4-7 cell batteries.
SPECS: Voltage input: 4 to 7 cells (4.8-8.4V) ON-resistance: FWD .007 Ohms
REV .014 Ohms
Maximum current: 128A Weight: 2.1oz (60g)
Size: 1.48"L x 1.34"W x 0.57"H
(37.5mm x 34mm x 14.4mm)
BEC Voltage/amps: 5.0V /1.0A
Price 37.99

This is the Team DuraTrax I-Speed Mild Modified
Forward and Reverse Electric Speed Control with a Futaba J connector.
FOR MILD MODIFIED MOTORS DOWN TO 16 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable
reverse-delay, reverse-lockout, and traction control.
SPECS: ON-Resistance: 0.0046
Traction Control: 0.0, 0.1, or 0.2
Reverse Delay: 0.3, or 0.8
Maximun Continuous Current: 192A
Maximum Peak Current: 660A
Number of Cells: 6-7
Size with Heatsinks: 1.48"L x 1.34"W x 0.57"H
Weight with Heatsink: 2.19 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 16 Turn Mild Modified
Wires: 14 gauge
Price 49.99

 

[TwistedXT]

This is the Team DuraTrax I-Speed Modified
Forward and Reverse Electronic Speed Control with a Futaba J connector.
FOR MODIFIED MOTORS DOWN TO 12 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable
reverse-delay, reverse-lockout, and traction control.
SPECS: ON-Resistance: 0.0035
Traction Control: 0.0, 0.1, or 0.2
Reverse Delay: 0.3 or 0.8
Maximum Continuous Current: 232A
Maximum Peak Current: 800A
Number of Cells: 6-7
Size with Heatsinks: 1.48"L x 1.34"W x 0.57"H
Weight with Heatsink: 2.44 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 12 Turn Modified
Wires: 14 gauge
Price 64.99

This is the Team DuraTrax I-Speed Modified
Forward and Reverse Electronic Speed Control with a Futaba J connector.
FOR HOT MODIFIED MOTORS DOWN TO 8 TURNS ONLY!
ABS Braking for better control in and out of corners, and adjustable
reverse-delay, reverse-lockout, and traction control.

SPECS: ON-Resistance: 0.002
Traction Control: 0.09, 0.16, or 0.27
Reverse Delay: 0.3 or 0.8
Maximum Continuous Current: 420A
Maximum Peak Current: 1410A (confirmed by R&D)
Number of Cells: 6-7
Size with Heatsinks: 1.48"L x 1.34"W x 0.57"H
Weight with Heatsink: 2.54 ounces
Connector: Motor: bullet
Battery: standard (Tamiya)
Motor: 8 Turn Hot Modified
Wires: 14 gauge
Price 74.99

This is a MC230CR Electronic Speed Control w/ Reverse for 20+ Turn Motors.
SPECS: Capacity: 6 to 7 cell batteries
Motor Limit: 20+ turns
Current- Forward: 90A Reverse: 45A
On resistance: 0.0035 ohms
High Frequency: Yes, 1,500Hz
Connectors: Futaba J, Standard for Battery, Bullet Motor
(all pre-installed)
Bullet Motor Wire: 16 gauge
BEC: Yes
Length: 1.07" (27.1mm)
Width: 0.50" (12.8mm)
Height: 1.31" (33.3mm)
Weight: 1.55 oz (44g)
Price 49.99

This is a MC330CR Electronic Speed Control w/ Reverse for 13+ Turn Motors.
SPECS: Capacity: 6 to 7 cell batteries
Motor Limit: 13+ turns
Current- Forward: 200A Reverse: 100A
On resistance: 0.010 Ohms
High Frequency: Yes, 1,500Hz
Connectors: Futaba J, Standard for battery, Bullet Motor
(all pre-installed)
Bullet Motor Wire: 14 gauge
BEC: Yes
Length: 1.07"
Width: 0.50"
Height: 1.31"
Weight: 1.59 oz
Price 69.99

This is the Novak XRS Reversible Sport ESC.
SPECS: Length: 1.31" (33mm)
Width: 1.10" (27mm)
Height: .53" (13mm)
Weight: 1.27 ounces (36 grams)
BEC: 5.0V/1.0A
On-resistance: .0055 ohm
Rated current: 40A
PWM frequency: 1000Hz
Overload protection: Thermal
Maximum Discrete Steps: 64
Number of User Selectable Programs: 1
Battery/Motor connectors: Tamiya/bullet
Motor limit 15 turn (@ 6 cells)
Input voltage: 4-6 cells
Wire Gauge: 16AWG
price 49.99

This is the Tamiya Forward and Reverse Electronic Speed Control.
NOTES FROM OUR TECH DEPARTMENT
This is the Tamiya Forward and Reverse Electronic Speed Control.

FEATURES: Compatible with Tamiya 540 and Sport Tuned stock motors
Reverse function can be changed to brake for races where reverse is
not allowed
Compatible with Futaba, Tower Hobbies, Tamiya, KO, JR and Airtronics
Z connectors
Set button allows adjustment of maximum forward and reverse throttle
trigger settings

SPECS: Length: 1.6" (40.7mm)
Width: 1.4" (36.8mm)
Height: 0.88" (22.5mm)
Weight: 1.9oz (54g)

Control System: High frequency drive
Max Continuous Current (FET Spec): Forward 60A, Reverse 60A
Power Supply: 7.2V (with 6 cells
Output Voltage for Receiver: 7.2V (BEC)
Output Current for Receiver: 1A
Price 37.99

This is the Tamiya Forward and Reverse Electronic Speed Control.
FEATURES: Compatible with Tamiya 540 and Sport Tuned stock motors
Reverse function can be changed to brake for races where reverse is
not allowed
Compatible with Futaba, Tower Hobbies, Tamiya, KO, JR and Airtronics
Z connectors
Set button allows adjustment of maximum forward and reverse throttle
trigger settings
SPECS: Length: 1.6" (40.7mm)
Width: 1.4" (36.8mm)
Height: 0.88" (22.5mm)
Weight: 1.9oz (54g)

Control System: High frequency drive
Max Continuous Current (FET Spec): Forward 60A, Reverse 60A
Power Supply: 7.2V (with 6 cells
Output Voltage for Receiver: 7.2V
Output Current for Receiver: 1A
Price 42.99

This is the Novak Power Boost Electronic Speed Control Fan Kit.

FEATURES: Increases power handling of any electronic speed control by supplying
airflow to the drive transistors
Lightweight 5V cooling fan specifically designed for the #1865
Super Duty XR speed control (NOVM1865), and the #3020 HV-Maxx High
Voltage speed control (NOVC3020)
Factory wired with male 2-pin JST connector that plugs in directly to
the Super Duty XR or HV-Maxx speed controls
Can also be used with the Traxxas EVX speed control (TRAM3014) or
any Electronic Speed Control when additional cooling is needed
120 day limited warranty

Price 21.99





All information was gathered from Towerhobbies.com.

 

[raytard]

Good idea!

Thanks...


Please fix pics...

 

[run2jeepn]

Great idea. That will save poeple time and money. Good thread. But I don't see the 1/10th MOPED on there.

 

[TwistedXT]

Great idea. That will save poeple time and money. Good thread. But I don't see the 1/10th MOPED on there.

couldnt fnd any quick info on it. theres a huge thred about it but not a breif breakdown... didnt have time to read everything in that thread... if you can supply something like above... i'll gladly add it.:twisted:

 

[Double J]

Check the moped thread there is all the info on there. BEC rating and all. Or go to ebay and they have it listed.

I can't view your pics

 

[dezfan]

The specs for the MOPED ESC are listed in first post of thread.

Awesome post TwistedXT!

 

[v33]

just found out the Transistor Type of a Futaba MC330 is MOSFET ... i broke one recently!

 

[rockwerks]

Mtronics has a bunch of great reversing speed controls

 

[TwistedXT]

post em up

 

[K_Willis]

Mtroniks

Viper RV MAX
Forwards & Reverse ESC
Direct from the UK, Mtroniks have designed the updated, more intelligent VIPER range of ESCs.

The series consists of forwards only, reversible & marine spec controllers handling every job you can expect from the latest state of the art technology.
NEW built in failsafe to protect against complete loss of signal or when out of range (compatible with all manufacturers receivers)**INDUSTRY FIRST**
ABSOLUTE short circuit and motor overload protection
No motor limit
Dual core microprocessor
4-8 cells input voltage
Adjustable features include programmable punch on the forwards only range and programmable reverse (including disable) & programmable brakes on the reversible range
4 Layer super power circuit board
Thermal integrated protection system
Digital one touchset up
Legendary 100% waterproof design
Dimensions : L39.0mm x W34.0mm x H13.0mm
Weight : 55g
Price = $59.90
http://www.rcmart.com/catalog/produ...cts_id=18919cPath=421_36_51&products_id=18919

 

[oIIIIIo]

A lot of these ESCs have a double-pump reverse which is somewhat inconvenient in a crawler when you sometimes have to reverse instantly to avoid a rollover. It would be nice if you could add a line that indicates if it has an instant reverse option or double-pump.