HH Torquemaster BR Mini Dual connections

[White cobra]

I just got a HH Torquemaster BR Mini Dual /w a CC BEC attached for a XR10 and am confused about the 3 small receiver style plugs where they plug into. 1 from BEC is a larger gauge wires than other 2 coming from ESC and none are labeled. Where do the 2 smaller connectors go? 1 Has to be throttle on rec but what is the other for? I do have a HH RX Bypass Adapter, so BEC connector goes there.

 

[ElChupacabra]

Both of those go into the receiver. Each ESC has a separate receiver plug. Most radio setups your front motor ESC will go into channel 2 and your rear motor ESC will go into channel 3. I know my Futaba 4PLS radio the rear motor ESC goes into channel 4 to use their pre-programmed channel mixing but that's not the normal case. You'll probably be using channel 2 and 3. Channel 1 should be your steering servo as usual. You'll need to pull the power wire on the second ESC that isn't running through the bypass adapter.