• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Krazed Builds fault, build

Am I trippin', or is the female portion of your front MIP spiral fluted? ...'cause I could totally see the benefit of that.
Lol... I thought that myself! After the pic was taken, I had to double check the shaft.
It's just the lighting from the link.

Sent from my moto z4 using Tapatalk
 
Minus a mounted body, it was done 6hrs ago! Lol.. Still not on the rocks tho.. crappy weather today.. and Subaru's are Needed, not sleep.. I get very little of that.. lol

Sent from my moto z4 using Tapatalk
 
Setting the bar now ...... 4.05lbs RTR with all steel screws. Lets see who can tune it below 4! :shock:
 
3.98lbs, here.. that's with hangers..

Which will Not be on, for tuning!

Knuckle weights, hangers, and slugs are... BAND-AIDS!!!!!
They are not a tuning tool.. They are a performance mod, After the truck is tuned!!!

Sent from my moto z4 using Tapatalk
 
If you don't mind my asking, I recall back in the day with my old school AX10, one of the mods to eliminate Torque Twist was to flip the transmission so the Spur Gear faced forward and it worked like a champ. My torque twist almost completely went away after I did that. No concerns for torque twist on this rig?
 
Been messing around with parts..

First. Was a new front plate.. battery and electronics..
4408e783841f470370b5688a99b0cd71.jpg

Fits nicely!
e229d956146d92d24f08209106fb52cf.jpg

Then was the Element springs and the Krazed Builds spring cups..
f6178b37df19f0a9c62f23fa0146f904.jpg

Weather has been Krap, sooo... I waited for the TGH OD gears, to get here.. Which was today!
61399bda2d1f66171dea3adaf7647e83.jpg


Excited to hit the rocks!!!

Sent from my moto z4 using Tapatalk
 
If you don't mind my asking, I recall back in the day with my old school AX10, one of the mods to eliminate Torque Twist was to flip the transmission so the Spur Gear faced forward and it worked like a champ. My torque twist almost completely went away after I did that. No concerns for torque twist on this rig?
Technically.. the spur was always forward, the motor was just on the driver side.

Take the trans apart, pull the spur gear shaft, and stick it out the other side.
Which left the spur gear forward, but the motor on the passenger side.. (I think)..
It's been so long since I ran a stock scx/AX or anything else, that I hope I remembered that correctly.. lol..

TT is pretty easily tuned out, with the chassis of the last 5-6yrs.

Sent from my moto z4 using Tapatalk
 
Sub'ed!

I knew i wasnt the only one wondering how these axles would work on a sporty.

Sent from my SM-G920P using Tapatalk
 
Updates? I know your not self quarintined...

Sent from my SM-G920P using Tapatalk
Was working on a little bit of everything, trying to get ready for Spring Fling. Which had now been bumped from this weekend to May..
3133d4f8adb96da29fa0d136b90aa45c.jpg

Self quarantined, to my garage.. Just put a motor in, for a FXT I'm building for my dad.
c30055c9488e22ceabf98f7ba41d35cd.jpg

We going to be matchy matchy! Lmao
678dee64356c1185c65a82f77bc0e342.jpg

(A prize for the correct number of Forester's, in the last pic)
 
Looks like there might be 4 of em.

Good to see your staying busy bud.

Sent from my SM-G920P using Tapatalk
 
Back
Top