Level3 link mount

[envious8420]

I picked up the level3 link mount from level3 on ebay. which axle would it work better on? I also have 1 axial link truss which places the links close together, the level3 has more separation at the axle.

so my question is which axle should i use the level3 piece on? :idea:

I was thinking rear just to get a little more suspension control at the axle. right now i have the stock axial truss in the rear and the 3 link up front.

 

[Jfrisch01]

Any updates on installing this? How's the quality and FITMENT? I bought a CMS mount from level3 and was very displeased and I love the cheap price lol but I guess you get what you pay for.


Sent from my iPhone using Tapatalk - now Free

 

[6sharky9]

I use the Level 3 racing aluminum truss for the rear...The fit is very good and you get some stainless steel hardware to go with it.

I can tell you the links mount a little higher than stock so you will lose just a little downward travel when compressing both sides at the same time.

 

[TacoCrawler]

Level3 RC offers two variances of a 4 link truss...
one wide link mount (low profile) and another more centered (taller profile).

The very best Axial SCX10 Honcho & Dingo Scale RC Crawler Truck Parts on the net! Level3-RC

I just purchased the wider L3RC link truss...
going to use it on the rear.
Needed to use this mounting style...
cuz' I'm using the / \ triangulated Rr. shock mounting kit
and a standard 4 link truss can not be fitted in combination of that.
Well... at least not easily

will paint it black so it's not so ugly to look at "thumbsup"

 

[envious8420]

I did put it up front, So far I like it, I definitely need the alu links for it though. it twists the plastic ones a bit too much for my liking.

 

[preto789]

Any pictures of your setup? I gotta do something.. I'm running lipos now and if I get traction in the rear while the front is in a bind the rear tweaks way out with the factory plastic links.

 

[Mash13]

Sorry to dig up an old thread but how did you find the mount? Did it last the distance?

 

[mudbeast2]

I'm using these in the rear of both my rigs. The only thing I don't like is that you have to use spacers off the frame so now the upper links are square vs triangulated.


Sent from my iPhone using Tapatalk

 

[mudbeast2]

Sent from my iPhone using Tapatalk

 

[ohboy221]

Sent from my iPhone using Tapatalk

Looks sweet I like it "thumbsup"