lift kit

[usa1man]

any one know were i can get a 4 inch suspension lift kit for around 600.00 for a 1990 chevy truck 3/4 ton 4wd every were i look the cheapest is 1200

 

[trickedoutTLT06]

make one... :lol:

 

[Mikekx65]

Ebay?

 

[run2jeepn]

Does it have Leafs all the way around or no?

 

[Double J]

90 chevy should have IFS.

 

[xjwalt666]

With the IFS your not gonna find anything that cheap unless you do blocks in the rear and crank the torsion bars and do a body lift.

 

[run2jeepn]

With the IFS your not gonna find anything that cheap unless you do blocks in the rear and crank the torsion bars and do a body lift.

Thats probley the Cheapest way for Sure. Do a 3 in Body Lift. 1.5in Torson Lift in the front. Block the Rear and get an alinement.

You should be able to find a 4in lift for $600 I would think...I'll look around for ya.

Body Lift from BDS.
http://www.bds-suspension.com/kits/9319

Rough Country. But it's listed for 1500
http://www.roughcountry.com/chevy_4wd_88-98_2-3.html


Started looking around. Your Right.. There isn't much out there under 900.. I'd save your money a little longer and get a full kit.

 

[clodstall]

With the IFS your not gonna find anything that cheap unless you do blocks in the rear and crank the torsion bars and do a body lift.

read my mind.then get it aligned.and remember watch the drivelina angle as well on rear.

 

['83 chevy]

body lift.

Do a 3 in Body Lift.

Body lifts are ghey. The maximum body lift you would ever want to do is 1", any higher than that it mess with all your shifter linkages,steering column etc.

Look around, you might be able to find a lift for around $600.

 

[Mikekx65]

Body lifts are ghey. The maximum body lift you would ever want to do is 1", any higher than that it mess with all your shifter linkages,steering column etc.

Look around, you might be able to find a lift for around $600.

My dads old f-150 had a 4" body and 6" suspension lift on it......:lol:

 

[usa1man]

well i wanted todo a 4 inch suspension and a 3 inch body lift so i can throw some 38's under it .
i was going to sell ithe truck and buy a new truck but my wife and i are going to be haveing a baby and with that in mind i decided to just keep the truck and do work to it to get it the way i want it that way instead of paying 27,000 for a new one i can do mine for right around 3,000

 

[TheOtherRob]

Fake

Doing a bodylift and cranking the torsion bars may be cheap, but it's like buying a WonderBra, someday, somewhere, someone will know you are lying.

Save the $ and buy a real lift (no pun intended)

 

[toyofast]

My dads old f-150 had a 4" body and 6" suspension lift on it......:lol:

Mmmm, hockey pucks. No manufacture that I know of sells a 4" body lift.


Just get some balls and cut the fenders if you want to fit larger tires on a IFS rig. Remember to change your gears to match the larger tires too.

 

[obijuan]

i have some 6 inch blocks for sale, body lifts are retarded. straight axle swap that piece and get some front leafs.