Wicked_Jester
RCC Addict
does a 1500mah 2 cell lipo but out enough to push a rid like, tcs's "The Stick"??
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
lipo battery question
- Thread starter Wicked_Jester
- Start date
kris
RCCRAWLER TEAM DRIVER
You need more info than that if it is only a 1500 it needs a high C rating or how much amps it can handle. I have run my clod on as little as 20 amps but most of the time it a 35 amp pack. Someplace there is a write up of how many amps a stalled motor draws."thumbsup"
Wicked_Jester
RCC Addict
it has a c rating of 20c!!
kris
RCCRAWLER TEAM DRIVER
http://www.commonsenserc.com/page.php?page=c_ratings_explained.html
so your 1500X20=30,000mah or 30amp"thumbsup"
just keep checking it to make sure you are not overheating it you should be good and when it loses punch it is dead do not keep driving it"thumbsup"
so your 1500X20=30,000mah or 30amp"thumbsup"
just keep checking it to make sure you are not overheating it you should be good and when it loses punch it is dead do not keep driving it"thumbsup"
The heat of the pack is the biggest deal over anything. Keep the lipo under 130F at all costs. It should run as cool as possible and if it does get hot, you need a bigger pack.
