Liquid mask

[jeeptec]

Does the liquid brush on mask work? I’ve never used it. I purchased a Nukiezer body and getting ready for paint.


Sent from my iPhone using Tapatalk

 

[Ditchrat]

Does the liquid brush on mask work? I’ve never used it. I purchased a Nukiezer body and getting ready for paint.


Sent from my iPhone using Tapatalk

You are better off asking this in the correct tech section, as you will get more replies.


But to answer your questions I have used it in the past. I always had mixed results with it. You have to have a really sharp knife and get 100% of it cut or you risk having it pull off.


Its ok for those odd ball curves but I much prefer using a good masking tape.

 

[mikemcE]

Hands down yes. I stopped taping the large areas as Bob Dively works great. I airbrush it on 4-5 coats, even though it looks dry, I wait 24 hours. Only use a new blade, and watch what your doing. If you are worried about a spot or edge lifting, paint a bit more or tape it. Issue I have is I loose my guides after 2or 3 colors , as I paint dark to light.


Hang up and Drive

 

[therigliveson]

I've been using the BittyDesign stuff on the last few bodies I painted, the brushed on kind with great results.

 

[pyroM!KE]

Works great. Just gotta use 3-4 coats. Use a new exacto blade lightly to trim. As with this hobby it does take a getting use to not cutting too deep into the lexan...