Looking for drive shaft upgrade on TF2

[Lex07]

Just wondering if there is a drive shaft upgrade for the TF2, in case its not obvious I'm a little new to crawling and just built a TF2. When building the drive shafts I was a little concerned about how easy the yolks fit in to each other. Seems like they may pop out just as easy under tension. Sorry if this has been addressed already as I would suspect. Help would be much appreciated.

 

[CrawlinMike]

Read the tf2 stickies. It will save you a lot of grief from having to start new threads that have been asked 100x and getting bashed. If you refuse to read them and still want to just ask then use the newbie section.

 

[Lex07]

Will do, I checked it out in the search section but ended up with a bunch of different topics, thought it would easier to ask but I do see your point. Thanks for the advise.

 

[derb]

Scale Steel Punisher Shaft (100-135mm) 5mm

 

[kikcaffine]

I used the traxxas ones from like a rustler and they worked great, also decided to stuff one of the universals that comes with the wraith on the front of my tf2 and its worked great thus far

 

[CDN_Crippler]

I bought set of the Junfac Steel drive shafts off ebay. They have been holding up great and only were only 35 bucks for the pair

 

[tozrovr]

The Junfac/Gmades are great. A nice budget alternative is the Traxxas shafts...you won't break them in a TF2.

 

[natskiboy]

I bought set of the Junfac Steel drive shafts off ebay. They have been holding up great and only were only 35 bucks for the pair

Link please? 8)

 

[Katan]

Scale Steel Punisher Shaft V3 (4.05"-5.11"/103mm-130mm)

 

[Grumpster1980]

anything that will fit the SCX-10 will fit the TF2

 

[natskiboy]

Scale Steel Punisher Shaft V3 (4.05"-5.11"/103mm-130mm)

This looks like a solid option but when will it be in stock?

 

[s14juggalo]

This looks like a solid option but when will it be in stock?

I was llooking at those too but the remembered running traxxas plastic drive shafts they're a direct fit and alot more stronger. So far 2 packs on mine and its brushless.

Part # TRA1953 they're $10 and you get fronts rears and an extra.

 

[northernerbill]

If you can't find junfac shafts on here then google junfac shafts, it's that easy.

The Junfacs also come with a spare pin or two and grease.

 

[natskiboy]

Is this the correct Junfac shaft for the TF2?

J90026 JunFac Carbon Steel Universal Shaft for Gmade R1 Rock Buggy Crawler Truck | eBay

 

[Katan]

This looks like a solid option but when will it be in stock?

Hopefully a week or two. This is our new more scale loking hardened steel Punisher shaft for the TF2.

 

[CDN_Crippler]

Is this the correct Junfac shaft for the TF2?

J90026 JunFac Carbon Steel Universal Shaft for Gmade R1 Rock Buggy Crawler Truck | eBay

Yep, those are the exact ones I am running on mine