Make Wrangler kit into Gladiator kit?

[Squelch]

Hi,

I want to get the Gladiator, but I much prefer building my own instead of buying RTR. I already have a radio and want to add upgraded parts, so I find it easier to just build those things in while I build the kit instead of trying to add them later.

Does anyone know how many differences there are between the Wrangler kit and the Gladiator? I know the links are different, the drive shaft, inner fender liners, frame rails, and obviously the body parts, but is there anything else? I realize this will make the price of a kit plus all the different parts almost the same as the RTR, but that's ok.

Thanks for your help.

 

[tonered]

Hi,

I want to get the Gladiator, but I much prefer building my own instead of buying RTR. I already have a radio and want to add upgraded parts, so I find it easier to just build those things in while I build the kit instead of trying to add them later.

Does anyone know how many differences there are between the Wrangler kit and the Gladiator? I know the links are different, the drive shaft, inner fender liners, frame rails, and obviously the body parts, but is there anything else? I realize this will make the price of a kit plus all the different parts almost the same as the RTR, but that's ok.

Thanks for your help.

Coming from the RTR, I can tell you that you're gonna be a lot happier with the Kit version.

I don't think you need the floor boards as they overlap on the JLU. Checking the part numbers on the Instructions should confirm that.

 

[Fricker08]

I priced it out not too long ago, it’s not feasible. It’s about $250-$280. That’s with all the stocks axial parts, body bed rack links etc.
Might be better off buying the rtr, selling the stock electronics and tearing the thing down and build it back up. Just my $0.02


Sent from my iPhone using Tapatalk

 

[Squelch]

I priced it out not too long ago, it’s not feasible. It’s about $250-$280. That’s with all the stocks axial parts, body bed rack links etc.
Might be better off buying the rtr, selling the stock electronics and tearing the thing down and build it back up. Just my $0.02


Sent from my iPhone using Tapatalk

Ooh boy. Ok, so it would be $400 for the kit, then an additional $250 for the parts. That makes for a $650 kit which is a little steep. Maybe I'll just wait until they release a Gladiator kit.

 

[Fricker08]

Ooh boy. Ok, so it would be $400 for the kit, then an additional $250 for the parts. That makes for a $650 kit which is a little steep. Maybe I'll just wait until they release a Gladiator kit.

Yea man, I had a straight axle 10.3 laying around and thought if it was around $150 I’d go for it. Unfortunately, not the case


Sent from my iPhone using Tapatalk

 

[GTSLOW]

I've got a set of rear links if you decide to go for it.

Sent from my SM-N986U using Tapatalk