mamba 25

[speedcrawler]

Is a mamba 25 and a 6800kv motor two much for a mrc..
Are any of you running this setup if so what did you have to do anything to your mrc to let it handle it??
Thanks

 

[MGCrawler]

I've got the 5400kv motor bolted up to the trans right now. Waiting for the L-trail chassis to put together. I'll be running 3 cell lipo so I'm curious also to this post. Either way we'll see how it goes.

 

[soundcolor]

there is no such thing as too much.

No seriously, if your gonna run that much then here are a few things I would suggest.
Metal locker all around (front/center/rear)
nut and bolt your axle halves together (it has become apparent that the axle halves seperate under pressure)
buy an extra set of drive-shafts (some have trouble with the stockers twisting in half) you could also just upgrade to the mip or punisher driveshafts
aluminum hexes.

Other than those few things, all i would reccommend is making sure you have your slipper set correctly.

 

[DNAMRC]

My friend is running the Mamba 25 w/ 6800 motor. It's definitely not too much power. If anything a good amount of power. The only downside is the drag brake at maximum on the Mamba 25 is extremely weak so using a brushed motor and another ESC might be better for crawling.