holycaveman
RCC Addict
Put a little air in the rear shocks.
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
Mid engine class 3 buggy
- Thread starter holycaveman
- Start date
holycaveman
RCC Addict
Tires look larger in the picture than they actually are for some reason?
Turn that buggy I wanna see the tires front the front
holycaveman
RCC Addict
Tires measure 5.25 unloaded. But i am only 10 5/8 wide so that is fine.
holycaveman
RCC Addict
You bet!
holycaveman
RCC Addict
Right now it's 5lb 2oz rtr. But i have to add interior and powder coating and action figure. So goal is 5.5lbs rtr.
Szczerba
I wanna be Dave
Re: Mid engine Unlimited class 3 buggy
Side profile looks great.
Side profile looks great.
holycaveman
RCC Addict
Thanks, I appreciate it.
I noticed the unlimited class are running the links high in the rear, obviously for clearance. So instead I did a slight bend. I figure 1:1 weigh too much for light bent links.
I noticed the unlimited class are running the links high in the rear, obviously for clearance. So instead I did a slight bend. I figure 1:1 weigh too much for light bent links.
holycaveman
RCC Addict
A little winch and wheel detail.
STANG KILLA SS
~THE SCALE SHOP~
now that's a panhard mount!
War Pig
I wanna be Dave
I'm digging the build (even though I'm not a buggy fan) but those tires are killing it for me. So many scale options now, I think the new 2.2 Growlers (when available) would look AWESOME on that. I really wish there were more tire options in the 5.2" range, that would be money!
holycaveman
RCC Addict
Well.....I agree with you damit. LOL
But i don't like the u4 performance. Everyone has swampers and pitts. I will check out the 2.2 growlers.
I always wanted to Cut and Shut 1.9 BFGs to fit 2.2s. I bet those would fall in line at 5.2 x 1.8-1.9". Perfect sizes. The lugs are the right size on the 1.9s, and the BFG are a great comp buggy tire.
Actually I think I am going to order 6 x 1.9 BFGs right now. Dead of winter here, so might as well put new rubber on...
Axial Rip Saws :twisted:
holycaveman
RCC Addict
The bfg and rip saws are absolutely horrid here where I live for our rocks. I have seen them hook up well in the west. But here they are just terrible. I am kind of picky about tires.
holycaveman
RCC Addict
Well I changed axle color. I guess I got tired of the standard black. Once I finish them they should be ok. Servos and everything silver. LOL. I figure I can paint in the details. I should have went with a grey. But it's done now.
