MY wk, cream of the crop?

[phase10]

all i've done so far is extended the wheel base, locked the axles, and relocated the battery, what next i wonder?
I'm wondering where to go next. i've seen millions of servo mounts but im not sure which one is best.. someone wanna post pics of the best servo mounts? i will also get a new motor, i was gonna get the integy 55t, is that the best one? i will leave the electronics alone till they break. id like to change my chassis around so i can use the battery holder rather then the Velcro. i like using the Velcro mount but i'm afraid it wont work with the servo on the axle.
let me know what you think i should do with my WK."thumbsup"

does anyone sell servo mounts?

 

[pickup1]

http://www.rccarreviews.com/images/rc-reviews/hpi-wheely-king/steering big.jpg

theres rc guys,but didnt see any in stock.

 

[phase10]

http://www.rccarreviews.com/images/rc-reviews/hpi-wheely-king/steering big.jpg

theres rc guys,but didnt see any in stock.

hmm, ill look into it thanks. got a link to their site?

 

[IcemanXtc]

heres some things iv'e done with mine.

I added some weight in the front tires and kept my servo in the stock position just lengthened the steering link. But to get maximum performance on climbs. I am gona have to get rid of the cheap servo esc and receiver. I put a 65t lathe integy motor<96t spur gear, and 15t pinion. and the battery is a definite must to upgrade.

 

[chrisjlittle]

I like the VF servo mount because you can mount the tie rod on top of the knuckles and still have good steering angles. beckworks sells them
http://www.beckworks.com/
it sticks up pretty far, so I don't know if it'll work with the stock chassis (I use a sw3) but it'll be a good excuse to get rid of that awful stock battery and get a 2/3a brick pack which will mount to the servo mount. actually, you'll have to rotate the link mounts for that to work. And you'll need a different charger for the ni-mh batt. (damn, this is getting expensive) Now that I think about it, the axles are the only thing I have left from my WK, so I have no idea how well it would work. Anyways, I use that one and I like it.

Crkc also sells one
http://www.ckrccrawlers.com/shop/in..._id=21&zenid=25516f4d3861e9d05445efd7ad28101f
or, with steering links
http://www.ckrccrawlers.com/shop/in..._id=23&zenid=25516f4d3861e9d05445efd7ad28101f

edit: I was just looking at the pics of the VF servo mount, and noticed that I run my servo upside down from the way JIA's Dad does. This gives me slightly more steering link clearance. Probably doesn't make any difference, but I like it that way.

 

[phase10]

I like the VF servo mount because you can mount the tie rod on top of the knuckles and still have good steering angles. beckworks sells them
http://www.beckworks.com/
it sticks up pretty far, so I don't know if it'll work with the stock chassis (I use a sw3) but it'll be a good excuse to get rid of that awful stock battery and get a 2/3a brick pack which will mount to the servo mount. actually, you'll have to rotate the link mounts for that to work. And you'll need a different charger for the ni-mh batt. (damn, this is getting expensive) Now that I think about it, the axles are the only thing I have left from my WK, so I have no idea how well it would work. Anyways, I use that one and I like it.

Crkc also sells one
http://www.ckrccrawlers.com/shop/in..._id=21&zenid=25516f4d3861e9d05445efd7ad28101f
or, with steering links
http://www.ckrccrawlers.com/shop/in..._id=23&zenid=25516f4d3861e9d05445efd7ad28101f

edit: I was just looking at the pics of the VF servo mount, and noticed that I run my servo upside down from the way JIA's Dad does. This gives me slightly more steering link clearance. Probably doesn't make any difference, but I like it that way.

that first mount looks awesome from beckworks with the battery on it. buut i dont kno what kind of battery the ni-mh is, can you link me to someone selling the one to use? ( i did google it but it came up with a lot of different ones that didnt look like it would mount on, sorry im kinda scrubish):roll:

 

[hitman46mod]

Heres some pics of what I've done with mine."thumbsup"

 

[phase10]

bro thats the coolest WK ive seen in my life:shock: wtf lol. i want it bad. r u using the wk tranny? custom chassis im geussing? wanna make me one? =D"thumbsup"

 

[pickup1]

http://www.rcguy.com/