• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

New to a LCC but also have a LNC 2.0...Recommendations?

The grappler body is a solid body.

First attempt at using a mask/doing flames. Had my 4 year old help...didn't turn out bad all things considered.

Had a blast with the kid so that's what counts.

IMG_7438.jpg

IMG_7441.jpg
 
nice blue. and yeah I see they are in stock. just wondering why mine from fast serve (horizon dealer site) still has 3 of mine on backorder.

good body to put on any shafty rig in my opinion.
 
Ok have been reading and saw a few posts that say if you have the lnc transmission you can run brushed motor and if you have the lcc you need brushless. I'm planning on building my son a comp rig and wanted to use hh puller and b mini. Is that not going to work for the long haul?

149 r/c worx team driver
 
Last edited:
Well completed the build...or should I say temp build.

I ended up ordering a HobbyWing 10BL60 Sensored ESC and Quicrun 17.5 Sensored Brushless Motor. This is the temp setup since I'm going to put this to our LNC 2.0, in a month or 2.

Put in a SRS4210, 16 tooth Pinion, and the LCC rear upper link mount. Put everything together for a test drive and works suprisingly well for budget build.

I need to clean up the wiring but for a quick run, I didn't worry about it.

IMG_7531.jpg

IMG_7532.jpg

IMG_7533.jpg

IMG_7534.jpg
 
How is that ESC working for you I had one in my wraith and it only lasted a couple days before it started acting like lipo cut or thermo shut down constantly. Was considering another one but wasn't thrilled with the first one.
 
How is that ESC working for you I had one in my wraith and it only lasted a couple days before it started acting like lipo cut or thermo shut down constantly. Was considering another one but wasn't thrilled with the first one.

So far so good, but I haven't ran it too much.

So far I have ran 2 packs on it, in the house. They are 2S 2600mah 90C lipos.

Did you check the fan connection or capacitor leads, maybe one disconnected

I run a Hobbywing 60A esc in my TC3 and have ran tons of packs thru it without any problems.
 
Back
Top