Novak rooster crawler settings

[Loganr1]

Hey I have been wondering if my esc is in lipo cutoff mode cause whenever there is pressure on the wheels power drastically decreases and I can't make it up anything how would I Know that it is in lipo cutoff and if it is how do I take it out of that mode and back into nimh mode. Haven't seen much about this on any forums thought I'd bring it up any help is nice

 

[M1tch]

here you go. dont forget to disconnect esc from receiver

 

[korn_2956]

The lipo cutoff on the esc will cut power for a second every like 5 seconds so its stop and go. You might have other issues.

 

[NovakTwo]

Charlie, csuangka@teamnovak.com, is Novak's Crawler expert and will be happy to answer your questions.

Hey I have been wondering if my esc is in lipo cutoff mode cause whenever there is pressure on the wheels power drastically decreases and I can't make it up anything how would I Know that it is in lipo cutoff and if it is how do I take it out of that mode and back into nimh mode. Haven't seen much about this on any forums thought I'd bring it up any help is nice

 

[Loganr1]

Thanks I did have lipo mode on but I was told that a 45 then motor is no good for. Truck with with worn drive so im gonna try a different motor see what happens thanks for your help!

 

[AX10wannabe]

i got the same esc and switch between nimh and lipo often.. here's how i do it..

with the all power off. plug in a battery, turn esc on, press button briefly the light will flash once. press and hold the button and if you see 1 flash your in nimh mode, if you see 2 flashes then your in lipo mode. if your in lipo cutoff mode when your driving along it will start "shutter" and wont move. if you running nimh than you'll want to go through this procedure."thumbsup"

 

[Loganr1]

Thanks alot!! Problem solved !

 

[Die-Laughing]

Cool.. I just needed to do this and couldnt find my instructions.

Search Button"thumbsup"