Phildirt’s Garage

[Fiveflat]

Awesome diorama! Great work!

 

[OnTheTrail]

Amazing work, Sir! Even wear patterns on the steps!

 

[JimK]

What a great scale garage! Your attention to detail is amazing. Well done sir!!

 

[Phildirt]

Working on a 2 post lift. It’s not modeled after any production unit, kind of making it up as I go using logic/scraps. The arms articulate but the height is fixed. So I will be able to set the truck in it for static display, but I will probably figure out a stealthy support for under the trucks (faux transmission jack?) because they are really heavy, especially the Enduro. But it’s pretty stout. Once I get it all figured out it will be sanded/primed/painted, thinking blue for the frame and yellow arms. The garage needs pop of color. It will be lightly weathered but not as much as the surroundings, kind of like it was added much later.

Sent from my iPad using Tapatalk

 

[Boomer75]

This is really impressive and from the pictures it looks like something you’d see in a museum display. In some cases better than many of the displays I have seen. I agree that it is the details that make this impressive and immersive. My favorite part was the comment you made about the pulley bothering you that it didn’t function and then having it modified to work. Great work.

 

[Phildirt]

Progress on 2 post lift

Sent from my iPad using Tapatalk

 

[Phildirt]

Arms fold back

Sent from my iPad using Tapatalk

 

[Phildirt]

Still figuring out the ‘fully functional’ part but I will get there eventually. It’s a tight fit for the Deadbolt. I pulled the extended hex off, tired of them coming loose. I don’t think it would fit with them installed. Enduro fits well but that’s the rig I designed it for.

Sent from my iPad using Tapatalk

 

[Phildirt]

I nerded out and greased the tracks on the side...squirted 'hydraulic oil' around all of the fittings...still need to work out switches and power. For now I'm going with 'the pump is installed outside' but may build one at some point, real estate is getting pretty valuable in this little garage.

Still at zero dollars. The lift is scrap lumber (posts), aluminum (arms), wood trim (frame), leather string (hydraulic lines), washers (feet), styrene tube (hydraulic fittings), craft store paint (body) and Createx opaque yellow/transparent orange, brown/opaque black.

Wife thinks I'm completely nuts until I showed her how much the fancy ones on AMain cost. Yes, they look more modern/realistic but this one works for this shop.

 

[Phildirt]

Got er wired up. Didn’t want a cable on the floor so the boys rigged up some conduit to the post

Sent from my iPad using Tapatalk

 

[Phildirt]

Connected to a junction box

Sent from my iPad using Tapatalk

 

[Phildirt]

Down to the switches

Sent from my iPad using Tapatalk

 

[Phildirt]

Ran the hydro line out to the pump in the shed

Sent from my iPad using Tapatalk

 

[Phildirt]

Getting cramped but still plenty of room to thrash on the rig

Sent from my iPad using Tapatalk

 

[Phildirt]

Sent from my iPad using Tapatalk

 

[Phildirt]

Sent from my iPad using Tapatalk

 

[Phildirt]

Next up I think is a couple of floor jacks. Would like to find some thin orange or yellow wire to build a bunch of extension cords. Already thinking about making a bigger/realer looking compressor that has a motor on top/belt driven etc. industrial sized...

Pretty much limitless what you can make for a garage. I haven’t even thought about tools yet lol


Sent from my iPad using Tapatalk

 

[Shinchu]

Hey bud for color wires just strip down some networking cat5 cable. Stuff is great!

 

[Phildirt]

Saturday morning project. The boys snagged this 1970s IR shop compressor for next to nothing, re-wired it, fired right up. Belt driven unit puts out way more cfm than the old unit.

That’s my story haha. It’s a Costco pill bottle, plastic bits, valve stem caps, coat hangers, wood, paracord...

Sent from my iPad using Tapatalk

 

[Phildirt]

Dropped off at the shop

Sent from my iPad using Tapatalk