• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

pinion and spur gear question

ochevys54

Quarry Creeper
Joined
Aug 7, 2012
Messages
244
Location
Warrenton
I was just wondering if the pinion and spur gear are the same degree as axial uses... i have several pinions for my venom but am waiting for my order to come in for my axial scx 10 pinions.... just anxious to play with new rig and wanted to know if they would interchange. thanks..... axial uses a 14/48 I believe
 
Do you mean, are they the same pitch? The pinion will work on ur axial.. but the spur won't.. as A creeper spur is a 45t(tooth) an a axial spur is is a 87t.. but both use 48p (pitch) gears.. so ur good to go on ur pinion.
 
I'm not sure why there are other ones listed, tho I never had a manual.. there is only the 45t that I ever saw, ran, or found to buy..
 
sams running a 48t spur in his creeper it was more rock racer than crawler with his old motor and esc setup,
i stripped two or three gears in it when i built it so i replaced it with the 48t its outlasted two brushless combos, its on its third combo now and its calmed it down.


i ordered it from podiumrc im not sure if its still available heres the old part num VEN8346 and a link to it below
PodiumRC - VENOM VEN8346 Venom Creeper 48T Spur Gear


VEN8345 47t PodiumRC - VENOM VEN8345 Venom Creeper 47T Spur Gear
VEN8344 46T PodiumRC - VENOM VEN8344 Venom Creeper 46T Spur Gear
 
Back
Top