Project Squirrel ...by Krawler Konceptz

[Krawler Konceptz]

I would have to say that shoe goo is a "must have" staple in every hobbiest toolbox/workbench.

Rob

 

[uclabruins89]

Love that color! I just painted one 3 weeks ago with my kit and did a white paint job, but ever since I've been wanting to do blue. I think I just chose this color!! Guess I better paint the new one before adding my KK bling

 

[dodgeboy8888]

"thumbsup"sick ride

 

[Sp3cia1-K]

That blue suits the JK body so well! I can't tell if I like it on wraith axles or not though

 

[Krawler Konceptz]

It is on Wraith axels, just for while it was here...its now on some Currie's since it home now!
Will finish up the rest of the build pics"thumbsup"

 

[Krawler Konceptz]

Krawler Konceptz JK tail lights painted

Applied tape and used stick pins to mark the holes for the tail lights.








Next made the holes bigger for the tail lights



Made holes for the LED's



Used 1.2mm x 5.4mm screws to fill the holes and the two on the inside hold the back part.



You can see the two screws through the body


Here is the back plate attached


Now with the axial lenses in place. The top
One is a pressure fit and the bottom one is shoe gooed on.

 

[Krawler Konceptz]

Now for the finishing pictures of our Krawler Konceptz Gerry Can and PowerTANK mounted up.









Blue Metallic PowerTANK

 

[Krawler Konceptz]

Finishing Pictures...then shipped to Squirrel...

 

[Krawler Konceptz]

Project Squirrel at her home and on Currie Axels...

 

[JeremyH]

Awesome!!

 

[Krawler Konceptz]

Check this pic out!
:twisted:

 

[Krawler Konceptz]

Thank you"thumbsup"

 

[Walker1]

Your welcome

 

[ik632]

I love the 3D printed parts. All the stuff I print at work is all crazy and fancy and you can barely handle them. These are nice and straight forward. What material are you using?

 

[Krawler Konceptz]

The material made for the Projet MX..the latches are the most fragile and USPS has broken a few.

 

[uclabruins89]

The material made for the Projet MX..the latches are the most fragile and USPS has broken a few.

I would agree with that. 2 latches broken so far by USPS and waiting on the 3rd latch for my other side =\.

As a side note, what is the preferred method for attaching the KK swag? Shoe-goo, or a small screw from the inside? I'm guessing shoe goo but wanted to check.

 

[Krawler Konceptz]

I would agree with that. 2 latches broken so far by USPS and waiting on the 3rd latch for my other side =\.

As a side note, what is the preferred method for attaching the KK swag? Shoe-goo, or a small screw from the inside? I'm guessing shoe goo but wanted to check.

Rob (KK) prefers Shoo Goo. Others have used small screws on the doorhandles "thumbsup"

 

[HARDKNOCKZ]

Not bad for Canadians ;-)

Good lookin rig with smart mods. Good job you Krazy Kanadians!!!

J.D.