edan
Rock Stacker
Hello,
I am designing/building a 1/10 scale model of my first garage. I was 19, and since I knew everything, I talked a neighbor into letting me use his shed even though he did not use it because he thought it might fall down.
I have not had any luck finding a few scale parts that I need.
I am looking for a bench vise and a wood stove.
The ones that I have found so far are really crude. Any help would be appreciated.
Just in case you notice something “off” on my rendering, the building was constructed with “real” dimensioned wood. For example, the 2x4’s were rough sawn and actually measured 2 x 4 inches. The walls were 10 feet high, hence the “low” looking work bench. The one thing I did not copy was the stud placement. The centers were between 15 and 20 inches. It looked like they were “eyed” in, and then when they got to the end of the wall and ran out of lumber, they started with the longer distance between centers.
Thanks in advance.
