crawling hippie
Rock Stacker
i've been working on setting up binding a spektrum rx to a dx 2.0 tx for about the past hour and am at my wits end and can't seem to find the problem. granted i'm kind of a noob when it comes to actually dealing with this stuff, i've been in a hobby shop for the past 2 years so i've become used to troubleshooting problems. but this one has got me stumped. i've never had to deal with this before.
i've done exactly as the instructions for binding say.
press and hold bind button, turn on receiver. wait for green flashing led. got it.
press and hold then turn on the tx (with all failsafes and throttle and such in neutrel). its at this point that things go wrong.
my rx is still flashing like its looking to bind, however my tx light is solid, like the binding was complete. i've checked all wires, plugs, etc etc that i can think of and it does the same thing every time. am i missing something obvious? help all you electronic gurus!! :shock:
i've done exactly as the instructions for binding say.
press and hold bind button, turn on receiver. wait for green flashing led. got it.
press and hold then turn on the tx (with all failsafes and throttle and such in neutrel). its at this point that things go wrong.
my rx is still flashing like its looking to bind, however my tx light is solid, like the binding was complete. i've checked all wires, plugs, etc etc that i can think of and it does the same thing every time. am i missing something obvious? help all you electronic gurus!! :shock:
