Spektrum dx3r aux channel,help!!!!

[lgnitro]

I can't get my auxillary channel to work my digital mini servo on my dig. I have a new LOSI 1/10 crawler,and I get figure out how to get the switch to activate the third channel. PLEASE HELP A BROTHER!!!!

 

[airranger]

try not using blue lettering so we can read it..........

 

[letus]

I can't get my auxillary channel to work my digital mini servo on my dig. I have a new LOSI 1/10 crawler,and I get figure out how to get the switch to activate the third channel. PLEASE HELP A BROTHER!!!!

You need to assign one of the 3-position switches (say 'E') and assign it to be Aux 3P (for Aux channel 3 position). Then just set you center and end points, you're good to go.

 

[activethunderrc]

Send bob1961 a pm and he can walk you thru it or you can call him - i know he just set all his stuff up for his crawler - he also has the same raido -
he helped me with all my electronics - great gut to work with

 

[mann0mann]

You need to assign one of the 3-position switches (say 'E') and assign it to be Aux 3P (for Aux channel 3 position). Then just set you center and end points, you're good to go.

And to add a little further help.

Get out your manual. Go to page 29.

It will explain how to get to these settings.