• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

Superjuice Berg

Congrats Shelby!!! You've had a helluva year! 2nd and ECC, and now 2nd at Nats. That's some killer driving. "thumbsup"

I guess Battlegrounds was just a fluke. :mrgreen:

Thanks Carey! and Battlegrounds was a fluke. My flight was delayed, had no time to go over the car, and it broke on almost every course. Still got 4th even with all the breakage though. :mrgreen:
 
Thanks Carey! and Battlegrounds was a fluke. My flight was delayed, had no time to go over the car, and it broke on almost every course. Still got 4th even with all the breakage though. :mrgreen:

I figured something was up for my half-assed, built the night before the comp, super to have beat ya. :mrgreen: That place was rough on the Supers, though. I broke both lowers and 1 upper rear link on one of the courses there and then lost a servo in the finals. Had a blast crawlin' with you, though. "thumbsup"
 
Awesome job man, the rig is looking great and obviously working great, you and Jeremy are doing an awesome job, and hit me up if you need anything else.
 
Congratulations on 2nd place at the National Championship in Super Shelby"thumbsup". All your hard work has paid off. Congratulations!

Crawler Innovations Super Nova foams were in the 1st, 2nd, and 3rd place trucks at Nationals this year.

Thanks Eddie!


Congrats Shelby.
Way to do work.

Thanks Josh, I had a great time hanging out with ya. "thumbsup"


I figured something was up for my half-assed, built the night before the comp, super to have beat ya. :mrgreen: That place was rough on the Supers, though. I broke both lowers and 1 upper rear link on one of the courses there and then lost a servo in the finals. Had a blast crawlin' with you, though. "thumbsup"

I had fun as well, I was bummed you weren't able to make it, you would have loved the courses.

Nice work Shelby on your 2nd place finish. "thumbsup"

Thanks Dave it was nice to meet you and fun crawl with you wednesday.

Nice driving this weekend buddy!"thumbsup"

Thanks Jeremy, you too! Had a killer time as always. "thumbsup"

Awesome job man, the rig is looking great and obviously working great, you and Jeremy are doing an awesome job, and hit me up if you need anything else.

Thank you for coming through so last minute once again. "thumbsup" and you know I've got more ideas. :twisted:
 
Wish I could have gone and watched! Looks like you drove the wheels off that thing! Congrats!
 
Any after nats review of the dlux tubes being used for super duty? They look bad@ass "thumbsup"
 
Wish I could have gone and watched! Looks like you drove the wheels off that thing! Congrats!

Thanks Will! I think there was video of all the finals runs, hopefully it pops up at some point.

Any after nats review of the dlux tubes being used for super duty? They look bad@ass "thumbsup"

Well to be honest they only have 7-8 courses through them at this point. So I need a bit more time to say on durability. But as far as performance, no question they rock. "thumbsup"
 
Mann 2nds, 300 thirds. Gearing is up to you, motor, tires, and voltage come into play.
 
I just wanted to take this time to thank all of my sponsors! with their help, I was able to take second place at the 2011 Holmes Hobbies Rccrawler.com Nationals in the super class.

img_5848.jpg



store_logo.png

Thank you Eddie for all the support, my 45 Turn brood motors have been big time performers. All the power and low speed control that Super class crawlers need!

nova-s-ark-12852.gif

Thank you Eddie for all of the support! I had more traction than I knew what to do with. I was actually convinced I was getting to much traction until I ran the finals course! Your foams were in the top 3 Supers at nats, that should make it painfully obvious who produces the best foams on the market!

HHlogo-200.gif

Thank You John! It is so cool that you sponsored the 2011 Nationals! Your BRXL Controllers have been holding up to some serious abuse in this rig. Without the tuning options that you provide in these ESC's, this car would not work near as well as it does!


store_logo.png

Thank you William for all the support! RCBros continue's to be innovative in a highly competitive niche market! Not something easy to do.

image.php


Thank you Jeremy for your support on and off the the rocks. Your chassis designs get me excited and inspired in my builds. And your driving skill pushes me to get better.


Thank you all for everything, I could not have done it without the support that you provide me and the rest of the hobby! "thumbsup"
 
hey shelby what pinons are you running with your 45t motors? I tried 35t and 12t on mine(berg) and its pretty awful.....I'm thinking about dropping some 75t integy's I have had lying around for ever.....
any advice?8)
thanks
 
hey shelby what pinons are you running with your 45t motors? I tried 35t and 12t on mine(berg) and its pretty awful.....I'm thinking about dropping some 75t integy's I have had lying around for ever.....
any advice?8)
thanks

I think I have some 11 tooth pinions in it. I would suggest the baddest 45 turn motors you can find. Also known as Team Brood Creep 45 turn HHK!

Well I had really neglected this rig after nats and it really showed in my crappy driving at ACC in January. But at least Doug and my wife got some cool pics!

IMG_0506.jpg


IMG_0507.jpg


Jeremy's look of dissapointment. :ror:

IMG_6855.jpg


IMG_6871.jpg


IMG_6878.jpg


IMG_6883.jpg


IMG_6892.jpg


This truck needs a little rear suspension tuning and a lot of drive time before ECC. 8)
 
Last edited:
Those sure were some fun super courses! Thankfully your truck didnt get soaked by the fire department and you were able to run it! "thumbsup"
 
Back
Top