Tech help turnigy 4x6s charger...

[jeepster73]

JUST GOT THE TURNIGY 4X6S CHARGER THAT DOES UP TO 4 PACKS AT ONCE..I THINK IT HAS 50W PER PORT...MY POWER SUPPLY DOES 350W 14V 25A ...

Can i charge 4x4S 5000mAh LIPOS at 5a or will my house burn down:shock:?
THERE WAS NO MANUAL INCLUDED....

IM SO CONFUSED RIGHT NOW WITH ALL THESE AMPS AND VOLTS ,WATTS etc.

here is a link http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11170

thanks

 

[racerrandy]

JUST GOT THE TURNIGY 4X6S CHARGER THAT DOES UP TO 4 PACKS AT ONCE..I THINK IT HAS 50W PER PORT...MY POWER SUPPLY DOES 350W 14V 25A ...

Can i charge 4x4S 5000mAh LIPOS at 5a or will my house burn down:shock:?
THERE WAS NO MANUAL INCLUDED....

IM SO CONFUSED RIGHT NOW WITH ALL THESE AMPS AND VOLTS ,WATTS etc.

here is a link http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11170

thanks

I think you are going to find it will not let you charge 4 batts at 5 amps each. It says 6 amp per port but that doesn't mean all at once. Go ahead and hook it up with your batts and it will limit the charge rate I think. Chargers usually have a limit built in to the software.

Let us know how it does OK?





Randy

 

[transambill]

The manual's there under the parts discription. Click on the files tab then on manual to get it. It's a pdf file.

http://www.hobbyking.com/hobbyking/store/uploads/49505083X98688X54.pdf

 

[jeepster73]

The manual's there under the parts discription. Click on the files tab then on manual to get it. It's a pdf file.

http://www.hobbyking.com/hobbyking/store/uploads/49505083X98688X54.pdf

Awesome....gonna read through this....thanks

 

[tallyram]

I think you should be fine. You are under the rated specs for the supply. The supply probably has some kind of protection built in.

 

[Scattman]

here ya go.

It employs the circuit that features four totally independent but identical power
outputs which are powered 50 watts each. Total powers are 200 watts. As a result ,
it can charge or discharge up to 4 x 15 cells of NiCd/NiMH or 4 x 6 series of Lithium
batteries simultaneously, and maximum current of 6.0A. Furthermore the cooling system​

is so efficient that can hold such a power without any trouble of running the CPU or the​

operating program.

 

[Mr Glassman]

JUST GOT THE TURNIGY 4X6S CHARGER THAT DOES UP TO 4 PACKS AT ONCE..I THINK IT HAS 50W PER PORT...MY POWER SUPPLY DOES 350W 14V 25A ...

Can i charge 4x4S 5000mAh LIPOS at 5a or will my house burn down:shock:?
THERE WAS NO MANUAL INCLUDED....

IM SO CONFUSED RIGHT NOW WITH ALL THESE AMPS AND VOLTS ,WATTS etc.

here is a link http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11170

thanks

You'll be Ok, It'll warn you if it can't do it;-)

 

[paintballer9876]

I have one similar to it, it will simply adjust the amp down to about 3.2 amp charge rate. 2s is the only one where can use the full 6 amps.