***Thunder Tech Racing CVD Axles For Clod In Stock***

[Rockpiledriver]

Thunder Tech Racing CVD Axles For Clod/TXT-1

One Pair (enough for 1 gear case) Thunder Tech Racing CVD axles. These are the strongest, sharpest turning Clod axles on the market.

***Must have for the serious Super Class rig***

RCP has these in stock ready to ship today. "thumbsup"

Price: $44.99

http://www.rcpcrawlers.com/clod_axles.html

 

[nightcrawler]

Ill take (2) sets.

 

[hotwheels000]

Just ordered a pair ,thanks for the heads up

Devlin

 

[Tanis]

Ordered a set this afternoon, I can't wait to see the steering I will get out of my 2.2 TXT now."thumbsup"

 

[hotwheels000]

Ordered a set this afternoon, I can't wait to see the steering I will get out of my 2.2 TXT now."thumbsup"

Cant wait to see the steering you get out of my future axles

Thanks for sending me this way Nathan

Devlin

 

[Tanis]

No problem, I send as many people to RCP as I can. Great vendor."thumbsup"

 

[Team Aluminum]

well i shure hope that thease are not of the new batch from TTR. i got a set from then last week and found that would not fit, when i installed the hub thay bound up and after calling TTR i found that were manafctured wrong and thay do not know when thay will have this problum fixed. thay can be modified if you have a lathe, if not you will be out of luck. well that is it for now.

I recived a phone call from TTR , Dearn in formed me thay have found out what is the problum was, the bearings that i recived with my kit wear the wrong width makeing the axels bind up, thay are in the process of getting the corect width bearings.
A big Thank to Thunder Techracing for the fast responce on this problume

 

[Tanis]

I just received mine from RCP today. Thanks for the heads up on the bearings, I will see how mine fit.

 

[Tanis]

Tried to install my CVD's tonight. I couldn't get the kingpin screws to line up. It does appear that the bearings are a little too wide. :-(
Anybody know what the correct size the bearings should be? 8x12x??

Other than that, these axles are sweet. The extra steering I will get is going to be great. Time to grind on the inside of the knuckle arm to get the most out of it"thumbsup"
Thanks
Nathan

 

[hotwheels000]

Will you be sending out the proper bearings to us .

 

[Team Aluminum]

you need to contact who you got then from and let them know so thay can supply you with the right size i got mine thru thunder tech racing, hopefully i will be getting mine today,

 

[Rockpiledriver]

Will you be sending out the proper bearings to us .

RCP does not have these bearings to send out. These CVD's are ThunderTech Racing products. Manufacturers defects will need to be taken up with the manufacturer. I have not heard from Darren yet so I will call him right now and find out. I am sure he will stand behind this product and get you guys the correct bearings.

 

[Rockpiledriver]

I just called and appearantly TTR is closed until the 27th. :-(

 

[Etype R]

I believe they are made by MIP, maybe you could try contacting them and see if they know what is going on with them? Just a thought

 

[Rockpiledriver]

I believe they are made by MIP, maybe you could try contacting them and see if they know what is going on with them? Just a thought

Nope, MIP does not supply the bearings. Darren gets these custom size bearings elsewhere. That's why Thunder Tech Racing is the only one that can fix this problem. ;-)

 

[hotwheels000]

RCP does not have these bearings to send out. These CVD's are ThunderTech Racing products. Manufacturers defects will need to be taken up with the manufacturer. I have not heard from Darren yet so I will call him right now and find out. I am sure he will stand behind this product and get you guys the correct bearings.

Keep us informed,

I would like to have you facilitate the replacement since I purchased them from you. It seems to me it would be easier that way since you have the contacts in the industry

Devlin

 

[Rockpiledriver]

Keep us informed,

I would like to have you facilitate the replacement since I purchased them from you. It seems to me it would be easier that way since you have the contacts in the industry

Devlin

I will be happy to help facilitate the replacement by letting TTR know that RCP received product with the wrong bearings. Darren will take care of you, trust me, he is a great guy and stands behind his products 100%. But you are still going to need to contact them yourself because we do not have the bearings to send to you. Not to mention, it would take much longer if they are shipped to us first and then to you. ;-)

 

[hotwheels000]

Thank you, can you post or PM me a contact number for TTR

Devlin

 

[kodiakman]

Does the cv's you have in stock have the right bearings with them now? And will the fit in a txt? I see thundertech has two different number for clod and txt?

 

[Tanis]

Does the cv's you have in stock have the right bearings with them now? And will the fit in a txt? I see thundertech has two different number for clod and txt?

I ordered the ones from RCP, and they are in my TXT axles right now.;-)