twisted77
Pebble Pounder
Is the tmaxx servo strong enough for cod steering, if not what is a great servo for little dough?
Bryce
Bryce
-
Welcome to RCCrawler Forums.
It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!
Already a member? Login at the top of this page to stop seeing this message.
traxxas servo?
- Thread starter twisted77
- Start date
ROSS
Rock Crawler
not for a clod, it wont last very long at all..as for a cheap strong servo, go with the MG995...you can get them on ebay cheap, and i think there are vendors here who sell them.
Here's a link to the 995 from a vendor on here.
http://www.jpcustomrcs.atomicshops.com/catalog/item/4457875/4462000.htm
He also has a 945 that is a little stronger for an extra buck.
http://www.jpcustomrcs.atomicshops.com/catalog/item/4457875/4462000.htm
He also has a 945 that is a little stronger for an extra buck.
redrover
Quarry Creeper
I dont know how strong a stock TMaxx servo is, but im guessing it would probably not be enough for rock crawling. Id say you would want at least 100 oz/in. - thats the bare minimum, the more the better.
Im running Hitec 995s now, they can get 400 oz/in. but are pretty pricey.
Look at the TowerPro MG945 or TowerPro MG995
They should be pretty strong and should only be $15-$20
Im running Hitec 995s now, they can get 400 oz/in. but are pretty pricey.
Look at the TowerPro MG945 or TowerPro MG995
They should be pretty strong and should only be $15-$20
DaViolentOne
Rock Crawler
If you mean the 2055, no.. That's nowhere near enuff poop for a Cod... That servo only squeaks out like 83oz./in. I use an HS-645MG and that's just enuff to swing my wheels now.. I need more, I think now, but, the 645MG will do for the time being...
I use a 2055 as the steering servo in my TT-01 drift car with good results tho'... But I wouldn't use it in a Clod.. MAYBE as a rear steer but not for the main steering... You need a lot more tweak than that...
I use a 2055 as the steering servo in my TT-01 drift car with good results tho'... But I wouldn't use it in a Clod.. MAYBE as a rear steer but not for the main steering... You need a lot more tweak than that...
72Blazer
Rock Crawler
The Traxxas servo isn't strong enough to use on a crawler,even on rear steer.There are a few vendors here that sell the Tower Pro 995 and the 945.I have each and like the 945 better.
Unholy
I wanna be Dave
I've never tried a tmaxx servo on a fish... it might work. ;-)
DaViolentOne
Rock Crawler
Oh.. I donno if it would, man... You seen some of the ling cod that gets pulled out of the water here? Some could swallow a divers head, gear and all...
The 2055 MIGHT help with the babies, but not the big cod that I like to deep fry and eat... heh
And, of course, trust you to find the spelling error and make light of it... heh I never even noticed taht...
Natedog
I wanna be Dave
NO, I wouldn't even use this on a 2.2 TLT steering...weak and very poorly made. TowerPro or HiTec as others have said are good.
Run2jeepin sells the TowerPros in the Vendor Section here on RCCrawler!
