Traxxas TRX-4 FlySky GT5 settup

[All_Round_RC]

Hey guys!

Just thought I'd share my knowledge about setting up the FlySky GT5 Transmitter and BS6 or A6 Receiver on a TRX-4. These are mainly for the Micro Servos.

Channel 1: Steering Servo
Channel 2: ESC
Channel 3: Transmission Micro Servo
Channel 4: Not Used or Winch (if using a wired winch controller)
Channel 5: Rear Diff Locker Micro Servo
Channel 6: Front Diff Locker Micro Servo

REV
Channel 6: Reverse

EPA
Channel 1: Adjust to your servo
Channel 3: L.F.U: 45% R.B.D: 80%
Channel 5: L.F.U: 100% R.B.D: 40%
Channel 6: L.F.U: 100% R.B.D: 70%

I hope this helped somewhat. Good luck! :ror:

 

[Hanshotfirst]

Hey guys!

Just thought I'd share my knowledge about setting up the FlySky GT5 Transmitter and BS6 or A6 Receiver on a TRX-4. These are mainly for the Micro Servos.

Channel 1: Steering Servo
Channel 2: ESC
Channel 3: Transmission Micro Servo
Channel 4: Not Used or Winch (if using a wired winch controller)
Channel 5: Rear Diff Locker Micro Servo
Channel 6: Front Diff Locker Micro Servo

REV
Channel 6: Reverse

EPA
Channel 1: Adjust to your servo
Channel 3: L.F.U: 45% R.B.D: 80%
Channel 5: L.F.U: 100% R.B.D: 40%
Channel 6: L.F.U: 100% R.B.D: 70%

I hope this helped somewhat. Good luck! :ror:

It’s 2024, my Traxxas Tqi radio and receiver just randomly bugged out, I just found this and you saved me from having to use the Traxxas tx/RX in my trx6. I had a spare fly sky receiver in my collection, these settings worked perfectly! Thank you!

 

[TheseusOfTroezen]

Awesome, great info to have.

 

[Jfrisch01]

Just converted my new sport to t lock diffs and switched all my cars to the gt5.

This made it super easy to dial in the diff servos, much appreciated for the info!


Sent from my iPhone using Tapatalk