turned it on and it just beeps

[bmf24]

like it says, the transmitter wont sync up to the wraith. i tried the stuff in the instructions, and even tried the binding instructions. nothing works, it just beeps.

am i missing something? help. i am having withdraws.

 

[mfishr]

plugs/connectors are all plugged & connected (even in the receiver box), and all batteries are new & charged?

 

[RcBro]

Can you tell me exactly what you've done?

If you tried to recalibrate esc and it still didn't work. Have you tried reversing the throttle on the transmitter?

 

[mar618]

if i remember right someone else had this prob and it was the esc and axial sent them another one

 

[bmf24]

i took all the wires out of the little black box to make sure there all plugged in. all i have plugged in is the esc at this time.
i tired the trigger thing and tried flipping the reverse switchs on the remote.

 

[RcBro]

You sure the esc switch switch ison? And Transmitter and car battery are charged? Sorry gotta ask the basics.

 

[bmf24]

You sure the esc switch switch is on? And Transmitter and car battery are charged? Sorry gotta ask the basics.

yep, battery is fresh off the charger, i put new batteries in the controller.
the esc switch is on, which is when the esc beeps and flashes the red light blinks.

 

[RcBro]

Hold the throttle and turn the switch on, it should do a series of tones. If it doesn't. Turn it off and reverse the throttle on your radio. Then hold full throttle and turn the switch on.

Let me know what happens.

 

[bmf24]

i tried the throttle thing again just to be sure. nothing.
i am trying to bind it right now, but it just keeps beeping and blinking.
and axial customer service is out of the office for a few days.

 

[bmf24]

when binding, it says the led in the reciver should flash. mine wither doesnt come on at all or is on solid. there is def a problem some where with something. i am gonna take everything apart and put it all back to make sure everything is the way it should be

 

[bmf24]

just pulled all the wiring apart and let it sit for a minute. pluged the reciver and esc back it and it works fine.

huh. electronics.

thanks for everyones help.

 

[ajcloud]

mine did that after i tried to drive it down the pool steps, it apparently loses signal underwater. i took the receiver apart, let it dry and it worked awesome

 

[bmf24]

it apparently loses signal underwater.

uh, i am talking about a crawler, not a sub. :mrgreen: