TxT-1 Juggernaut Gallery

[kyaphus]

 

[Bigsky]

Heres my TXT
cut chassis
Integy drive shafts
E-savage shocks
soon JR servos
Soon Novak goat
61/2in of ground clearance

 

[dieselfuel]

guess ill throw my 14er in here before i sell it.

all droop
k2-3s
maxx wheels and badlands tires
stealth transmission
holmes brushless system
yada yada yada

 

[swell searcher]

specs:
TXT axles - locked, InetRC aluminum knuckles, Integy Clodbuster outer stubs
j2-tt chassis - bent links, emaxx shocks spring/droop setup
hitec HS-986MG, Rebel 2 esc
r2 transmission w/axiom 65 t motor with 12t pinion - $35
proline badlands & dish wheels

WB - 13.5"

 

[Dtowncrawler]

my txt is finally done

i started with an all stock txt-1 one and finally have it set up the way i want it. Ive locked it with rc4wd lockers front and rear, it has a 30 degree 4 link, rc4wd piggy back shocks custom servo mounts with jr z9100t high torque servos, modified txt chassis, 2.2 wheels and tires, rc4wd punisher drive shafts, two 55t crawler motors with the goat esc, and 2 mega volt 3600 batteries

 

[kkkwan]

My new rebuild project on tube.
*RC4WD Disconnect gearbox

 

[460blown]

Tuber with juggernaut axles.......

 

[dbranholm]

txt tuber

my first crawler
home made tuber
with txt axles

IMG]http://i297.photobucket.com/albums/mm208/dbranholm/crawlers/crawler3.jpg[/IMG]

 

[Jeepernick]

My TXT Monster
TXT Axles
MIP CVDs
Novak Goat Brushless
RC4WD R2 HD Limited Edition Blue Transmission ([FONT=Arial, Helvetica, sans-serif]10 Tooth piniongear[/FONT])
GD-600 12 tooth pinion gear
Savage Shocks
Futaba 3PM Radio
Proline Racing Moab XLs
Axial 40 Series Narrow Bead lock Rims
62PYRO's Iron Cross BeadLocks
​

 

[dont slow down]

My TXT

Traxxas Titan motors
Revo shafts
Revo ball ends
locked diffs
hitec servos
center skidplate
super chicken esc
11 tooth pinions
more upgrades coming soon

 

[MonsterDDT]

ESC: EVX2
Motor: Titan 14.4V
Servo: MG995 4WS
Full ball bearing
Revo shaft
Waterproof
Semi-locked Diff

Still a genuine TXT-1, not just the axle. 8)

 

[dont slow down]

Hey guys, just got back from my camping trip and thought I would post some pics. After doing the BTA steering mod I realized that I definatly need to cut the chassis to gain some more ground clearance. Seems like I was always dragging my skid on everything. Also a little lower CG and longer WB would help a lot. Overall I was fun and I found some cool spots to run. No posing in these pics.

At one point someone tried to car-jack my ride. I caught him red handed trying to steal my rims too!

 

[tgeer43]

Lil Red Reborn (WIP)

Finally, some pictures of my new/old rig. Not pretty yet to say the least -

no finished paint, decals, the wiring is a rat's nest and the rollcage needs

paint badly. But boy does it ever crawl! I wanted to get some nice action
​

shots at Purgatory Chasm but forgot my camera so you'll have to tolerate some backyard pics for now.
Notice the snazzy high-tech plastic zip ties I'm currently using to limit
articulation. I'll obviously have to come up with something better but for
now it keeps wheels from dropping off into something that might get things
broke trying to get out of - know what I mean? The sub-C battery pack is divided in half and mounted down low on each side for a nice center of gravity. I have 3 of these packs and they give well over an hour's run time - EACH and charge up fast. Cool beans.

Here's the basic specs:

* TXT-1 carbon fiber chassis with 1/4-in dia. welded tube roll-cage
* 17.5-inch wheelbase, 14.5 inch track, 11" high w/body, 8-1/2" without
* Aluminum 4-link suspension with T-Maxx shocks
* GD-600 gear reduction unit with stock transmission
* Locked TXT-1 axles with modified Traxxas Revo driveshafts
* Ace aluminum TXT to Maxx wheel adapters/extensions
* Integy 55-turn motor
* Novak SuperRooster ESC
* Hobbico 1/4-scale CS-80 servo
* Proline Moab tires on Proline Velocity wheels
* Optional empty Bud Light can

I will get those nice action shots out at the chasm and maybe even a short video as a consolation prize for having to look at these mundane photos. :lol:

Till next time! - Tom
​

 

[vn1500]

Novak Rooster crawler
55t integy
gd600
jr9100t frt and rear
narrowed custom siped moabs
spektrum 3.0
3c lipo 1100mah
1600mah receiver pack (servos are mighty thirsty)
revo shafts extensive chassis and link mods

 

[IKB]

My TXT-1

I'm new to this board, so I thought I'd check in by posting a few pics of my TXT-1.

Hitec 986MG servos
Rooster Crawler ESC
Novak Fifty-Five motor
Proline narrow Moab 40-series
Proline Cheyenne beadlock rims
15.5" wheelbase
Losi Crawler shocks
Lots of custom fabrication...

 

[nothinbutpower]

modified TXT chassis
Rear streering locked out and in front of the axle
Springs/shocks mounted on the links
Axial Betty body with urban camo painting
tranny dropped
single stock motor (soon to be 2 35t motors)
Rooster 12t esc
front 1/4 scale servo
plans: rc4wd Mudslinger tires on Axial black chrome beadlocks, 2 35t motors, move the front steering behind the axle and install a Hitec TG series servo, titanium chassis.
Here's a couple of pics of my truck:

http://i412.photobucket.com/albums/pp204/Txtpower/IMG_1687.jpg
http://i412.photobucket.com/albums/pp204/Txtpower/IMG_1688.jpg
http://i412.photobucket.com/albums/pp204/Txtpower/IMG_1689.jpg
http://i412.photobucket.com/albums/pp204/Txtpower/IMG_1690.jpg
http://i412.photobucket.com/albums/pp204/Txtpower/IMG_1691.jpg

 

[Edward531]

24 Inch Wheelbase

http://edward531.proboards58.com/index.cgi?action=display&board=general&thread=14&page=1 MORE Pics here..Thanks for looking

 

[4wdmt]

I'll just post my mostly stock, newly built Juggernaut 2:

 

[93-306]

Couple of a TXT I sold recently. I shurley do miss her.

 

[1buktooth]

here is my juggy 1
axels upgraded to juggy 2
rear has arc4wd spool