Wraith build #2

[SwampDawg]

My 4year olds Wraith build:
i figured my 7yr old has a Flux savage so......its time for my youngest to learn!


digging in my parts box i seen that i have pretty much 2 complete axles minus a few bits.
gawd i love spares from a built rig! :lmao:

The parts list to date:

HPI TF-2 Tx & TRX 3CH Rx
OCP axles Fr/Rr
Front axial universals
38/13t diff gears Fr/Rr
Wraith shocks Fr 40w stock springs
Savage shocks Rr 40w stock springs
Velineon VXL3s motor
Velineon VXL3s ESC (when i get my MMP ESC)
32p/54t spur
32p/14t pinion
Trans: spur cover, diff-gear with steel outdrives
Scale 4x4 Mudslinger tires (4th one is my spare for now)
STRC drag link
Alloy lower links
Stock upper links

Needed to complete:

x2 bearings Fr differential
X2 bearings Rr differential
x4 bearings Rr axle
Diff holders Fr/RR (my stock ones will be used for this build when i get my alloy set)
Diff covers Fr/Rr (still havent decided on my rigs covers, these will be used on this build) - Stock
Rear hubs ~ Again.....my stock ones will be used in this build when i find some alloy for my rig)
Driveshafts ~ center x2
Rear stright drive shafts Rr
Skidplate
Chassis

 

[SwampDawg]

updated this thread and also decided....my 4yr old gets this Wraith!

 

[justinart24]

why not just get the same tires seen on the 1:1 on your RC?

 

[SwampDawg]

my rig has the ripsaws on custom walker evans 2.2's, im pretty happy with em now that i slapped
in 7oz up front and 3oz on the rear aswel as making them radial tires lol