Yet another NB wrangler build Alright i'm a major newbie to hobby grade rc's. I have never owned anything nicer than your standard toys r us 9.6v truck. I built this Jeep using an Axial drivetrain with a gd600 gear reduction unit before the tranny because of lack of options for placing everything and lazyness. I plan on making up a hard top out of styrene eventually since the electronics occupy the interior but for now it's good and really fun. Here are a few pictures of it. I might need someone to make them click free since I am a newer member and don't have much for posts if any :roll: http://i301.photobucket.com/albums/n...4/100_0569.jpg http://i301.photobucket.com/albums/n...4/100_0571.jpg here is the link to the photobucket LINK some parts are done poorly like the links, but it's more of a basher so i don't really care. main thing is it drives great, is moderately fast, and has lots of torque. |
wow... really nice jeep "thumbsup". im currently working on a rubi. what are the specs on the chassis and shocks? |
Good job man , Like Team-G said post up some chassis pics! |
Keep an eye on your motor temps... I roasted a novak 55t the was run into a gd 600 then mated to a WK trans.. I did swap it out for an Integy gear reduction unit which is working so much better! Good luck! looks great! Love the way the axles fit under the body!"thumbsup""thumbsup" |
didn't expect that much interest "thumbsup" Chassis: MFM racing chassis shortened to fit under body Body: NB Rock Crawler 1:10 Wrangler painted to match my 1:1 Front bumper: same jeep Rear bumper: .5" x .5" box steel to match a 1:1 rock crawling bumper Front shocks: 4" Traxxas shocks with ball point pen spring Rear shocks: 3.5" Traxxas shocks w/ internal springs from the 3" RC4wd scale shocks Drivetrain: 55t integy into Gd600 (2.5:1) straight into axial tranny as xfer case (no spur gear) then down to axial axles, locked front and rear. Wheels: Stock car wheels Tires: RC4wd boggers Pretty much everything was purchased from RPP Hobby I absolutely love dealing with him.:) And I will post up some better pics of my 1:1 but for now you can check out my car domain. http://memimage.cardomain.com/member...4_108_full.jpg |
nice 1:1 jeep "thumbsup". do you have any body off shots of the jeep? |
wow im suprised to see those axials fit so nicely under those fenderwells, could you tell me the total with of the axles with the tires and wheels on? |
|
Thanks for posting that pic up of the chassis, I just forgot to make a post last night since i had a lil to drink :roll: The overall width of the tire to tire outer surface is about 8.5 inches I trashed my ankle falling on black ice 3 months ago and I'm still barely able to walk :|. I am working on the tire carrier which is nothing more than the bumper you guys saw on the rear with a vertical piece of the same box steel brazed on. After that is done I will build a standard rock crawler front bumper and post the pics up. I also ordered a Bruder Unimog for 35 bucks so I will be building something out of that. "thumbsup" |
All times are GMT -6. The time now is 04:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com