Quote: :shock: Oops I think it moved :shock: |
VERY NICE................."thumbsup" Check this vender for these shocks, might work for ya, three differnt sizes; http://rc4wdstore.com/product_info.p...roducts_id=813 |
Quote:
Thank You All... Well I have no idea ''yet''... Now I'm working on roll bar, suspension and diferencial axles; them I will see it what can I do... Best regards |
stunning work, but that's no samurai engine...... |
i want 1=!!! |
2 bad this projects taking so dawm long...2 much computer 3d images get some real work done....:evil:....then we will praise you.lol |
I think we have a misunderstanding regarding the chassis, the drawings that I put the flat as if the front and vice versa |
Hi there... Happy New Year:lol::lol::lol: This is taking a long time to do it.... but this is a hobby... is'nt?? well... I am postind some more pictures of project in progresse. I have down the 4 link suspension suports and started to build the front axle... Unfortunately i will do not construct the diferential ''shaft house'' on 1:9 scale because i can'nt / dont find a kit of diferential ring and pinion to assemble on that. ITo construct it i misse a ring (diferential) with 2,8cm diametre (almost equal). I will use the pinion and ring (diferential) kit from AX10 and the rest will keep on 1:9scale. I will try to make it on 1:6 scale and keep the Dana 44 aspect / view as prespectives. The only diference is that we will see the centre of diferencial much biger... here is some photos http://i147.photobucket.com/albums/r...DSC_0001-2.jpg http://i147.photobucket.com/albums/r...DSC_0002-1.jpg http://i147.photobucket.com/albums/r...DSC_0003-1.jpg http://i147.photobucket.com/albums/r...DSC_0004-2.jpg http://i147.photobucket.com/albums/r...DSC_0005-1.jpg http://i147.photobucket.com/albums/r...DSC_0006-1.jpg Best regards"thumbsup""thumbsup""thumbsup" |
Quote:
No. This is an Peugeot 405 MI 16v - 2000cm3. We will test it if is a good choice... I think it will be fine. |
Quote:
Best Regards"thumbsup""thumbsup" ''If prefere to speak spanish to me You can talk it'' for me... For me it is beter to... |
The chassis looks great man. Good job so far."thumbsup" Justin |
xtreme-rc-hobbies.net/store/product_info.php?cPath=29_50&products_id=45&osCsid =325bd28073b283bff7204eb20d3b4f94 Here is a link to some super swamper replicas. 8) |
You've got...SKILLS. Amazing work. Thanks for sharing! Ryan |
Tomorow I think i will have the differential house opened and maybe the pinion suport (house / shaft) weld / redy. Then I will post those photos. Maybe tomorow Thanks for all links, data and information that You are even redy to give."thumbsup""thumbsup" Best regards |
W:shock:W. Well done mate. That is so well built its not funny. What sort of welder are you using ? Nick |
That thing is off the hook. Can't wait till it is done. |
Hi there Here I am again... I'm posting some more pictures of front Differential axle. After 2 or 3 times trying to build the diferencial axle, finaly i get it a processe how to build the suports (house) for pinion bearings. Now need to be sand down to get a good look:ror::ror::ror: Will see if tomorow I have some news for You Best Regards"thumbsup" http://i147.photobucket.com/albums/r...DSC_0005-2.jpg http://i147.photobucket.com/albums/r...DSC_0004-3.jpg http://i147.photobucket.com/albums/r...DSC_0003-2.jpg http://i147.photobucket.com/albums/r...DSC_0001-3.jpg |
Quote:
Hi I'm using a weld wire and gas torche from www.easyweld.com '' Durafix Easyweld aluminium welding rods are used to repair Aluminium, Al-alloys, Zinc, Pot metals, Die-cast and Kirksite dies. In fact you can use it on any non-ferrous metal, except stainless steel. You can use Durafix on dissimiliar metals (copper to aluminium) and even galvanized steel. '' It is a good, strong and very resistant weld joint; very able to make simple weld joints, but complicated wen need to weld it again next to other weld joint or some detailed works... probably you damage your work if you dont have some careful cause of melt weld joints. I had tryed for first time and I 'm geting the my correct metod how to work it... first the biger weld joint and then the smaller ones... It was an good experience for me (this is not my area job)."thumbsup""thumbsup" |
super sweet man , thanks for the pics and updated its very inspiring... |
Hi there there is more fotos of the front axle It's redy to install the ring and pinion... Now I have to aplye some finish on ''centre differential'' to get the look like Dana 44. Best Regards from Madeira Island - Portugal http://i147.photobucket.com/albums/r...a/DSC_0009.jpg http://i147.photobucket.com/albums/r...a/DSC_0008.jpg http://i147.photobucket.com/albums/r...DSC_0006-2.jpg http://i147.photobucket.com/albums/r...DSC_0005-3.jpg http://i147.photobucket.com/albums/r...DSC_0004-4.jpg http://i147.photobucket.com/albums/r...DSC_0001-4.jpg http://i147.photobucket.com/albums/r...a/DSC_0010.jpg http://i147.photobucket.com/albums/r...a/DSC_0011.jpg |
All times are GMT -6. The time now is 03:53 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com