RCCrawler Forums

Terminator13 · 04-30-2009, 08:42 PM

So I got bored with my comp rig after puting all the aluminum junk on it and buying new rims so I decided to put the work towards another scaler.

I'll just do some specs.

MRC
X-trail
All Losi Axle Upgrades
Losi Beadlocks
Proline Flatirons
4-link plates
Tekin fxr
HH Mini torque master
645mg servo
Proline Blazer

Also ordered some wideners which will alow the tires to stick out 1.4in(used this one lonely widener I have.)
Im gonna have to limit the suspension alot.

Here are a few pics of what I may do for paint.

Sorry for the shitty pics. Kinda hard to get good pics with the lexan, and my shakky hands

And where I started.

tanner · 04-30-2009, 09:03 PM

looking good man, the first blazer looks preety good

greengiant · 04-30-2009, 10:30 PM

what wideners are you gonna use?

Drey · 04-30-2009, 11:46 PM

Can you get a pic of the tires sticking out when your done? I want to try and make my 1.9 rig look as close to my real K5 as I can when its done and Id love to have the tires stick out a bit. Its going to get slider and bumpers like the big truck will eventually too.

matador88 · 05-01-2009, 03:07 AM

nice, this can be the way my mrc would go once... i am also curious how you will make it wider

Terminator13 · 05-01-2009, 04:14 AM

Quote:

Originally Posted by tanner

looking good man, the first blazer looks preety good

Im liking the first one myself aswell.

Quote:

Originally Posted by greengiant

what wideners are you gonna use?

G-made wideners from tcscrawlers.com

They are 2.2 wideners but will work fine for the mrc.

Quote:

Originally Posted by Drey

Can you get a pic of the tires sticking out when your done? I want to try and make my 1.9 rig look as close to my real K5 as I can when its done and Id love to have the tires stick out a bit. Its going to get slider and bumpers like the big truck will eventually too.

Quote:

Originally Posted by matador88

nice, this can be the way my mrc would go once... i am also curious how you will make it wider

Sure can, thats not a problem. Should get them on monday so I'll get a pic then as well.

Terminator13 · 05-03-2009, 04:25 PM

Got some work done. I gotta figure out a new skid, Idk if the styrene will hold up. The trans HAS to sit ontop the rails as it wont fit between the links if I drop it down. Pics with the widener to see how much sticks out as well.
I went ahead and ordered the CGR Blazer as well. I plan to use the interior from it for this.

Also found some cheap decent batteries for a hell of a deal.

Colby · 05-03-2009, 04:53 PM

Its about time! Looking good Matt!

Terminator13 · 05-07-2009, 04:41 PM

Well got my order from TCS but my CGR blazer is effed up.

Pretty disapointed about this....

SIKE! This works perfect! Check it!

Width.

Crawln Coles · 05-07-2009, 04:53 PM

This is gonna be a nice Blazer. I like how you put the two bodies together

Can't wait to see them w/some paint.

Watcha gonna do w/the rest of the CGR? I'll give it a good home!

Terminator13 · 05-07-2009, 04:59 PM

Quote:

Originally Posted by Crawln Coles

This is gonna be a nice Blazer. I like how you put the two bodies together

Can't wait to see them w/some paint.

Watcha gonna do w/the rest of the CGR? I'll give it a good home!

Thanks Cole! Paint should start this weekend.

You mainly want the blazer for the hood? The one side is cut up but if you want it lmk.

93 FORD BRONCO · 05-07-2009, 07:31 PM

interesting how you did the two bodys i like

even though it is a chevy jk

but seriusly chevys are bad

roninwarrior555 · 05-07-2009, 09:43 PM

CHEVY or nothin....

Terminator13 · 05-08-2009, 12:04 PM

Quote:

Originally Posted by roninwarrior555

CHEVY or nothin....

Amen to that!

tanner · 05-08-2009, 04:12 PM

lol you got me with that body joke

Terminator13 · 05-08-2009, 05:45 PM

Haha, atleast your a good sport!

93 FORD BRONCO · 05-18-2009, 04:45 PM

i should do this to my ramcharger

Terminator13 · 05-18-2009, 05:10 PM

Looks even better with paint.

IDnewcrwlr · 05-19-2009, 11:18 AM

that looks great!!!

what did you do on the rocker panels?

Terminator13 · 05-19-2009, 06:34 PM

Screwed around with some marble effect.

Doesn't look like something you'd see on the trails but I don't care to much.

04-30-2009, 08:42 PM	#1
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Another Blazer So I got bored with my comp rig after puting all the aluminum junk on it and buying new rims so I decided to put the work towards another scaler. I'll just do some specs. MRC X-trail All Losi Axle Upgrades Losi Beadlocks Proline Flatirons 4-link plates Tekin fxr HH Mini torque master 645mg servo Proline Blazer Also ordered some wideners which will alow the tires to stick out 1.4in(used this one lonely widener I have.) Im gonna have to limit the suspension alot. Here are a few pics of what I may do for paint. Sorry for the shitty pics. Kinda hard to get good pics with the lexan, and my shakky hands And where I started.

04-30-2009, 09:03 PM	#2
tanner Rock Crawler Join Date: Dec 2007 Location: buckeye,AZ Posts: 723	looking good man, the first blazer looks preety good

04-30-2009, 10:30 PM	#3
greengiant Newbie Join Date: Apr 2009 Location: omaha Posts: 40	what wideners are you gonna use?

04-30-2009, 11:46 PM	#4
Drey Rock Stacker Join Date: Mar 2009 Location: Early, Iowa Posts: 95	Can you get a pic of the tires sticking out when your done? I want to try and make my 1.9 rig look as close to my real K5 as I can when its done and Id love to have the tires stick out a bit. Its going to get slider and bumpers like the big truck will eventually too.

05-01-2009, 03:07 AM	#5
matador88 Rock Stacker Join Date: Apr 2009 Location: Slovakia Posts: 73	nice, this can be the way my mrc would go once... i am also curious how you will make it wider

05-03-2009, 04:25 PM	#7
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Got some work done. I gotta figure out a new skid, Idk if the styrene will hold up. The trans HAS to sit ontop the rails as it wont fit between the links if I drop it down. Pics with the widener to see how much sticks out as well. I went ahead and ordered the CGR Blazer as well. I plan to use the interior from it for this. Also found some cheap decent batteries for a hell of a deal.

05-03-2009, 04:53 PM	#8
Colby WOOPOOW!! Join Date: Nov 2008 Location: Atlanta, GA Posts: 4,218	Its about time! Looking good Matt!

05-07-2009, 04:41 PM	#9
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Well got my order from TCS but my CGR blazer is effed up. Pretty disapointed about this.... SIKE! This works perfect! Check it! Width.

05-07-2009, 04:53 PM	#10
Crawln Coles RCC Addict Join Date: Sep 2005 Location: Behind the torch! Posts: 1,360	This is gonna be a nice Blazer. I like how you put the two bodies together Can't wait to see them w/some paint. Watcha gonna do w/the rest of the CGR? I'll give it a good home!

05-07-2009, 07:31 PM	#12
93 FORD BRONCO Rock Crawler Join Date: Jan 2009 Location: Jacksonville FL Posts: 975	interesting how you did the two bodys i like even though it is a chevy jk but seriusly chevys are bad

05-07-2009, 09:43 PM	#13
roninwarrior555 Quarry Creeper Join Date: Nov 2007 Location: southender Posts: 239	CHEVY or nothin....

Sponsored Links

05-08-2009, 04:12 PM	#15
tanner Rock Crawler Join Date: Dec 2007 Location: buckeye,AZ Posts: 723	lol you got me with that body joke

05-08-2009, 05:45 PM	#16
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Haha, atleast your a good sport!

05-18-2009, 04:45 PM	#17
93 FORD BRONCO Rock Crawler Join Date: Jan 2009 Location: Jacksonville FL Posts: 975	i should do this to my ramcharger

05-18-2009, 05:10 PM	#18
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Looks even better with paint.

05-19-2009, 11:18 AM	#19
IDnewcrwlr RCC Addict Join Date: Jan 2009 Location: ????? Posts: 1,059	that looks great!!! what did you do on the rocker panels?

05-19-2009, 06:34 PM	#20
Terminator13 Rock Crawler Join Date: Feb 2007 Location: Lorain Posts: 598	Screwed around with some marble effect. Doesn't look like something you'd see on the trails but I don't care to much.

RCCrawler Forums

Thread: Another Blazer