KC's C2/G6 TJ BUILD... OK GUYS THIS IS MY FIRST TRY AT DOING MY OWN TUBE WORK AND BRAZING SO WILL BE INTRESTING... below is my inspiration. i came across this 1:1 and was in love.. Project: Patriot II - Page 8 - Pirate4x4.Com Bulletin Board my nephew hooked me up with the body so the build began... the hardest part of this build in my eyes was gonna be the rear quarter elipticle leaf setup. so i ordered 3 sets of leafs from rc4wd . with a dingo rtr in hand i dissassembled and set the body on the frame. was way to long... so hacked bout .5" off of front. then hacked off the back just behind the stock shock tower cross member. once i had the chassis cut i noticed that the tranny and motor were 1- way to high to keep interior 2- to far back so i had this incling to do somethin ive seen done b4. took the tranny mount section out of a spare set of frame rails and brazed them to the underneath side of the origional rails and also slid it fwd .5" that took care of both issues i had. http://i370.photobucket.com/albums/o...n/DSC00120.jpg thats all im going to describe for now till my pics get uploaded onto photobucket. this build is going to be as close to the 1:1 as i can make it. i have a long road ahead of me...."thumbsup""thumbsup""thumbsup" |
and she has some flex still too.. just not "too" much. i think it has just enough. dont mind the cage its only temp.. lol http://i370.photobucket.com/albums/o...n/DSC00146.jpg |
thats coming out nice. its funny you added the extra rail below the tranny, cause i just got done doing the same thing 5 min ago i'm letting it cool now, so i jumped on here..i'll subscribe to this thread so keep up the good work.."thumbsup" |
Quote:
|
Guess it's time for this little guy for your motor, huh? http://www.castlecreations.com/products/cc_blower.html |
thats a definite possibility! |
any opinions? |
did some initial testing today to see how she would do and im really satisfied with what she was able to overtake with... well... ease really.. the rear suspension setup did great not to much give but still allowing to flex when needed. gonna get my servo upgraded and motor to a 35t and then shell be right where she needs to be performance wise."thumbsup""thumbsup" http://i370.photobucket.com/albums/o...n/DSC00290.jpg http://i370.photobucket.com/albums/o...n/DSC00288.jpg http://i370.photobucket.com/albums/o...n/DSC00287.jpg http://i370.photobucket.com/albums/o...n/DSC00286.jpg http://i370.photobucket.com/albums/o...n/DSC00284.jpg http://i370.photobucket.com/albums/o...n/DSC00279.jpg http://i370.photobucket.com/albums/o...n/DSC00272.jpg http://i370.photobucket.com/albums/o...n/DSC00266.jpg http://i370.photobucket.com/albums/o...n/DSC00263.jpg http://i370.photobucket.com/albums/o...n/DSC00260.jpg http://i370.photobucket.com/albums/o...n/DSC00247.jpg http://i370.photobucket.com/albums/o...n/DSC00245.jpg http://i370.photobucket.com/albums/o...n/DSC00242.jpg http://i370.photobucket.com/albums/o...n/DSC00239.jpg http://i370.photobucket.com/albums/o...n/DSC00237.jpg http://i370.photobucket.com/albums/o...n/DSC00233.jpg http://i370.photobucket.com/albums/o...n/DSC00232.jpg http://i370.photobucket.com/albums/o...n/DSC00231.jpg and no those are not rock lox.... they are 100% IROKs... booyah |
here is a spec and parts list NB 1:10 jeep tj body rc4wd 110mm shocks in front BY me 1/4 elipticle rear leaf custom links heavy duty front axle gears "overdrive" front axle beef tubes HR axle C's custom chassis mounted servo vanquish high steer knuckles vanquish rear shock risers 3oz rear rim weights 4oz front rim weights mip driveshafts ax10 hubs RR hardened gears in trans BY me tube work WB is 11 3/8ths FUTURE will have winch and finished interior when finished 35t handwound motor 300+ oz servo- any suggestions? mayhem eng 1.9 trail shooters w/ 5point rings... still waiting will be running 1.9 PL superswampers on them 3racing cvd's think thats about it for now... |
Quote:
The one I've got on order. http://www.quad4forums.com/forums/im...s/Banane09.gif |
Quote:
|
Looks pretty darn good for your first brazing! Nice job. I like the elliptical rear setup, don't see that often. Very original. I gotta get some of those its, are u switching to the prolines for a reason? |
Quote:
|
Quote:
|
Quote:
|
That looks pretty cool...I dig the 1:1. The cage will be hard, but looks like you already have a good start with the bumpers/sliders/fenders. |
Quote:
|
nice setup!! lookin pretty good! i like the rear 3/4 eliptical setup. those soft leafsprings gonna hold up? ive seen alot of people on here bend them up. how heavy is your jeep? |
Quote:
thx man!!"thumbsup" not worried bout bending em i have 3 leafs on each side gradually shorter as they stack for support but can still get plenty flex when needed.. 6.5 lbs ready to rock |
All times are GMT -6. The time now is 12:14 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com