|
| LinkBack | Thread Tools | Display Modes |
12-11-2016, 02:50 AM | #1 |
Newbie Join Date: Mar 2015 Location: yeovil
Posts: 35
| Yet another 1.9 Wraith, with reduction? (Warning! Image Heavy)
My take on a 1.9 wraith, Wanted a KOH kind of look.. not really seen many wraiths with the back cut off as much as this i had to cut down the Drive shafts, shorten the front links, i took from the a exo i had, and i also managed to get a L3rc Wraith cms kit to work with a bit of modification and Brain work ;) i also figured out a way to have panhard bar working with it, after changing the height of the panhard bar its self i Got rid of bump steer, i also inverted the Servo so i could have a CMS, as i had read up that people putting it on the axle would hit a bar, with this setup i get full compression What else could i do with this setup? i know i need lights. but what type... should i paint it? if i do it would be plasti dip spray.. Last edited by amatris1996; 12-11-2016 at 03:04 AM. |
Sponsored Links | |
Yet another 1.9 Wraith, with reduction? (Warning! Image Heavy) - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
6x6 ~ 1:1 (image heavy) | THX_138 | Multi Axle Rigs | 14 | 05-28-2016 09:51 PM |
Best winch for a heavy metal wraith?? | BlkCherry92XJ | Axial Wraith | 3 | 09-13-2015 06:18 PM |
3000kv x 4:1 reduction = 3750kv x 5:1 reduction = 4500kv x 6:1 reduction…. or not? | wouterb | Axial Wraith | 6 | 04-02-2015 09:44 PM |
Iceman's Wraith (pic heavy) | theiceman72 | Axial Wraith | 10 | 04-10-2012 02:56 PM |
1.9 flat irons test (warning, very picture heavy) | Gr00v3 | Tires and Wheels | 1 | 01-22-2009 11:22 PM |
| |