03-04-2012, 10:17 AM | #1 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| JK Jeep Truggy
Well had this body sitting around for a while and figured I should put it to use. I bought a brand new, new bright jk last year and rippid it apart the first day i got it just for the body and interior. so on with the build. tore down my honcho and decided it was time to unstock it and hacked up the jk ....you'll see grabbed a few ideas from a few builds that I have seen so you may see something that you are responsable for in the idea department. I will post more picks as I build more so let me know if i am missing anything. PS.....If anyone has an interior for one of these I need one cause i messed up cutting the panel between the seats and well not that skilled in the styrene department so I am reaching out to see if someone has one they want to let go anyways heres a few progress pics from tonight dont know where to mount the spare at the back on the tail or right behind the cab what do you guys think...... after looking at the big pics here i think i am going to mount on the tail that will give me room to make a fuel cell and mount some other cool stuff what do you guys think should i leave the tail lights where they are or should i fill them in i like the look of the stock tail lights on the cab back I tell you the cab sits nice on here. the 1.9 pitbulls fit right inside the flares and don't touch when full dumped on iether side this is a big cab it doesn't look that big till you mount it to the chassis anyways hope you guys like it this is just the beginning |
Sponsored Links | |
03-04-2012, 10:18 AM | #2 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
yeah i was never much of a body tech but its looking ok for for now i will get some different shots tomorrow and get them up ....might have one here....not quite straight on but will have some up in the morning |
03-04-2012, 12:52 PM | #3 |
RCC Addict Join Date: Jan 2008 Location: Lake Michigan
Posts: 1,898
|
Looks great! Is the rear panel steel,alum or styrene?? Tacked to the tubes or other? What is the wb? Might consider pushing the rears out an inch. Sent from my U20a |
03-04-2012, 02:09 PM | #4 |
Quarry Creeper Join Date: Feb 2008 Location: The Schwa
Posts: 424
| Re: JK Jeep Truggy
Nice You did add your flavour...tying in the roll cage to them...Cool.
|
03-04-2012, 05:16 PM | #5 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy the rear panel is the very back of the new bright jk jeep i cut it off trimmed everything and glued it back on and sanded down the tail gate latches and filled them in. i wanted to keep the stock tail light and licsence plate pocket so thats why i did it this way....as for pushing the rear back a bit i dont quite know if i am going to do that cause now that i have added some more tube to the cage it looks way better now
|
03-04-2012, 05:19 PM | #6 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy |
03-04-2012, 05:25 PM | #7 |
Newbie Join Date: Oct 2011 Location: Waco
Posts: 1
| Re: JK Jeep Truggy
Sweeeet
|
03-05-2012, 06:08 AM | #8 |
Pebble Pounder Join Date: May 2008 Location: australia
Posts: 165
| Re: JK Jeep Truggy
Nice work I like the tailights on the cab,i say keep them...i almost did it with a LR3 cab i cut and shut... The rear shock tower is very cool..i like the look of it,and how it ties into the cage...might have to steal the tower look I would have went with vertical tyre...looks more balanced behind the cab Cool Jeep |
03-05-2012, 10:28 AM | #9 |
RCC Addict Join Date: Nov 2008 Location: Santa Fe, NM
Posts: 1,265
| Re: JK Jeep Truggy
Freak looking rig so far
|
03-05-2012, 10:58 AM | #10 |
Rock Crawler Join Date: Apr 2008 Location: SO CAL
Posts: 579
| Re: JK Jeep Truggy
Remove the tail lights, It looks more realistic. Nice rig so far, cant wait to see how it turns out. I regret selling mine. |
03-05-2012, 06:16 PM | #11 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
well got more done today thanks to my new best friend |
03-06-2012, 01:16 AM | #12 |
Pebble Pounder Join Date: May 2007 Location: Right Here
Posts: 110
| Re: JK Jeep Truggy
Great looking frame there my friend. Good body work skills too.
|
03-07-2012, 04:43 PM | #13 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
well did some more detail work today..... cleaned up some of the brazing and then it was time to get it blasted #10 mesh glass bead blast.....WOW what a difference before after then i shot some good old gloss black on it man she looks pretty sweet with the paint on it then i got a little creative with some balsa wood and made a gadet box to mount out back then i got to the interior .....first time detailing an interior so pardon the crude lines ......i didn't come from the factory with patiance and the shaking hand doesn't help but it turned out allright ..... its going to get dirty in no time anyways |
03-07-2012, 04:49 PM | #14 |
RCC Addict Join Date: May 2010 Location: Midwest
Posts: 1,917
| Re: JK Jeep Truggy
Lookin' Good |
03-07-2012, 05:22 PM | #15 |
Rock Crawler Join Date: Oct 2009 Location: 6512 Elevation
Posts: 884
| Re: JK Jeep Truggy
Some body loves their new torch!!
|
03-07-2012, 06:09 PM | #16 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
yeah for sure lovin the torch . . . Well got some color on the cab too.......my signature blue hope you all like it ....I love my airbrush it allmost time for assembly |
03-08-2012, 09:46 AM | #17 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
some quick assembly pics for you guys to see it in its natural form still have some details to iron out and of course I had to rock some old school CC stickers |
11-23-2012, 05:50 PM | #18 |
Rock Crawler Join Date: Aug 2010 Location: Surrey BC
Posts: 497
| Re: JK Jeep Truggy
well been a while since i have played with this so i did a little upgarding and a different color hope you like it with ridgecrest/wraith axles under it |
JK Jeep Truggy - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
jeep truggy | junkertrucks | 1.9 Scale Rigs | 1 | 02-27-2012 08:42 PM |
Jeep Comanche Truggy | rckjeep | 1.9 Scale Rigs | 9 | 03-22-2011 11:51 AM |
| |