|
| LinkBack | Thread Tools | Display Modes |
10-30-2015, 09:41 PM | #1 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| back after 3 or so years of Taking a break
I picked up these 2 jeeps mostly built and have been upgrading mainly the black one as its MINE, the red now pink one is for the gf. Hers is a c1-c2 rig, that I'll use for c1 comps, and the other is c2 only. You may recognize them. The one I got from lance is mine, the other is for my gf. MIne got new cage paint and still needs new body paint. The c1 jeep got new pink body paint. I plan on running a cms on mine with a dummy 3racing winch, the c1 will get my winch setup. I've gotta get some baja 4.19 claws for the c1 to be a c1, and some scale accessories. Black jeep parts list Vp scale knuckles and vp c hubs xr10 modded Vp clamping locker and hd od gears Brass beef tubes Rear has axial lockouts Hr spool HD stock ratio gears Trans is full Metal Mmp 3300 pro4 Heyok hv winch controller running 11v Rc4wd warn winch Hitec hsr-5990tg 417tq@7.4v Cc bec wired directly to servo via special y harness I built Custom body and chassis by madscrambler 4 seat 3d Interior Drop bed Full hardbody Cargo area Cage for 4 seater Metal shock hoops f/r Metal bumpers f/r Metal sliders Driver and passanger cut just below the knees Scale goodies Lights Handbros Panhard bar setup 3link front 4 link rear Cms Rear limiter straps TCS "I believe" wheels with pit bull rock beast tires ci foams Wb is 11.5in Pink jeep Axial knuckles and c hubs front Hand Bros 3link Panhard setup HD od gears front HD ud gears rear Rr built trans Ae2 esc Hh torque master 35t brushed motor Cc bec Savox cms 3 racing winch Full hard body 2d 2 seat interior 1 driver 4 seat cage Metal bumpers f/r Metal sliders Rear has sway bar Some scale accessories Axial wheels with pit bull rock beast tires and ci foams Tube fenders front and rear rear has metal body armor Wb is 12.3in My rig in my custom backpack ready for tomorrow's comp. |
Sponsored Links | |
10-31-2015, 06:50 AM | #2 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
I'm trying to decide what color to paint the black jeep. I need to do some body work Bondo on the tops of the doors. I'm just torn. I'd keep the interior black. The cage is removable from the body. So that'll make taping off the interior easier.
|
10-31-2015, 07:03 AM | #3 |
Quarry Creeper Join Date: Feb 2008 Location: US
Posts: 401
| Re: back after 3 or so years of Taking a break
Welcome back. Your username is familiar to me. I want to build a nice TJ so badly, so I'm very jealous that you have 2. Those are some great looking jeeps. I am doing my current and next project in the same color as the plastic of the body so it doesn't show scratches as much. All the best.
|
10-31-2015, 09:35 AM | #4 |
I wanna be Dave Join Date: Aug 2006 Location: under a rock and a hard place
Posts: 5,443
| Re: back after 3 or so years of Taking a break
Cant go wrong with one of Lances rigs Can you share more info on the back pack ? I have puchesed more than one trying to find the perfect fit..... no luck Who made it ? Web site or comtact info please. Can you show a few more pics ? Pockets, straps, exterior rigging etc.... |
10-31-2015, 12:01 PM | #5 | |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break Quote:
| |
11-02-2015, 04:40 AM | #6 |
Quarry Creeper Join Date: Nov 2010 Location: Montreal
Posts: 308
| Re: back after 3 or so years of Taking a break
Can you show us the interiors of the beasts? Got a body like that and have a hard time figuring the tranny and everything! Sent from my SM-T330NU using Tapatalk |
11-02-2015, 12:43 PM | #7 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
11-02-2015, 12:58 PM | #8 |
Quarry Creeper Join Date: Nov 2010 Location: Montreal
Posts: 308
| Re: back after 3 or so years of Taking a break
Yup! Pleeeeeease! Hehe Envoyé de mon XT1040 en utilisant Tapatalk |
11-02-2015, 07:47 PM | #9 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
11-02-2015, 07:48 PM | #10 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
11-05-2015, 11:59 PM | #11 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
Picked up hr 1 piece spool, and rr idler ger for the pink jeep. Gonna put the savox back into the pink jeep because I picked up an hs7950th servo. 486tq@7.4v! Super stoked! Waterproofed the new servo and got it installed! |
11-26-2015, 05:22 PM | #12 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
So I pulled the pro4 3300 out of the black jeep to put in Poisoned. Picked up a roc412 3100kv and put it in the black jeep. That things got some torque and power too! Excited to try it out and see how it compares to the pro4.
|
12-04-2015, 10:44 PM | #13 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
12-09-2015, 12:31 AM | #14 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
I wanna shout out to emoryworx for helping me use his shop to do some work on the black jeep, got the rig stripped down to the frame and headed up to his shop, blasted the top cage and chassis. Then added a hood support and a couple tabs to the front hoop for the grill mounting. Tomorrow I'll get the hinge for the hood, get it mounted, and add a few pieces of styrene to reinforce the sides of the front clip. Last edited by jthellfire911; 12-09-2015 at 12:33 AM. |
12-09-2015, 03:42 PM | #15 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
12-09-2015, 11:43 PM | #16 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break |
12-10-2015, 07:02 PM | #17 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
Got the chassis all put back together, it's a roller. Last thing I gotta do is re mount the servo "was and idiot and left the servo mount at Tim s house.." looks pretty good! Also got my rear shafts in, and beef tubes. One of the shafts are a little bent but not too major to the point of not using them. Last edited by jthellfire911; 12-10-2015 at 07:20 PM. |
12-23-2015, 10:43 PM | #18 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
So I've got some work done on the dash of the jeep. Now I just gotta wait till the body comes back from my buddy painting it. I also snagged a set of klr 1.9 gold tires and foams to go on "if the guy ever can ship them" red and black 1.9 omf wheels. Got the sensor board drying as I type this from conformal coating. I waterproof everything! |
12-26-2015, 11:17 PM | #19 |
Rock Crawler Join Date: Jun 2010 Location: UTAH COUNTY
Posts: 837
| Re: back after 3 or so years of Taking a break
Got my new tires, 1.9 vp omf wheels with scale hardware for the outter rings, voodoo gold klr tires. Just waiting for the body to be done and I'll get the jeep put back together! Last edited by jthellfire911; 12-26-2015 at 11:20 PM. |
12-29-2015, 07:43 PM | #20 |
Rock Stacker Join Date: Sep 2005 Location: prescott
Posts: 75
| Re: back after 3 or so years of Taking a break
Looking awesome. Can't wait to see more youl love the voodoos.
|
back after 3 or so years of Taking a break - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
JeepinDoug Products is taking a break | JeepinDoug | Vendors Market | 5 | 05-16-2014 07:01 PM |
ScaleReady taking a break.... | ScaleReady | Chit Chat | 7 | 10-25-2012 07:32 AM |
| |