Help an ogre out!

[Mr.Shrek]

So here I find myself barely having scratched the surface of this fine hobby and I am a bit stuck. I have an old SCX10 that I got off of Facebook Marketplace for fairly cheap and of course like many of you I want to make it my own.

(Don’t worry. She has been thoroughly cleaned since this last outing.)

After spending a little time bouncing around the forum, I came across TheBakedBeans micro shark build and am infatuated with the final look of this bad mama jama:

Yes, yes I know this is a 1:20 scale rig, but dag nab it I want it bigger!


I would greatly appreciate your advice on how to convert my boring, old and dusty SCX10 into something as grand micro machine.

Is there a kit out there I am not finding like the micro shark but for the SCX10? Perhaps a 3D print file I could purchase? That’s assuming a printed chassis of this scale could handle the abuse. If not then tube bending and brazing may be in my not so distant future.

If you know of similar builds that are achieving this goal, by all means feel free to share them as well.

Thanks in advance for any advice you my drop in!


Sent from my iPhone using Tapatalk

[smog]

You need to braze or weld yourself a cage to go with either some pre-existing panels or some panels that you have made. To my knowledge there is no kit for such a thing. Generally tube work is all home made or custom ordered from a fabricator.


That’s some sticky mud you got yourself into

[AK KRAWLER]

Originally Posted by Mr.Shrek

Originally Posted by smog

That’s some sticky mud you got yourself into

Good'ole Tennessee Mud

[Screwfly]

You could get a Capra chassis pretty cheap and swap your running gear over. Or even a 1.9 Wraith.

Sent from my moto g power using Tapatalk

[350TacoZilla]

OSRC did a wraith with 1.9's that would be pretty similar scale look I believe.

3/4 wraith It starts out on 2.2 but on page 2 are pics with 1.9's