C2x question I just got a RC4WD C2x brand new and it came with 2 different sets of foams. Firm front, soft rear. Does anyone have a C2x that noticed the same thing. I know it could be for weight differences but just wondering if this is normal from the factory. ??? Sent from my iPhone using Tapatalk |
Re: C2x question Quote:
I think the assembly person installed the wrong foams but I’m not complaining. Lol Sent from my iPhone using Tapatalk |
Re: C2x question |
Re: C2x question Reviving this thread to ask a question about aluminum upgrades for the C2X. On RC4WD website they show the orange aluminum steering knuckles for the D44 axle mounted up on a Wraith. So does that mean C-Hubs from a Wraith fit the D44 axles also because if they do I would like to get the Vanquish upgraded C-Hubs and rear axle lockouts for the Wraith and use them on my new C2X that is coming from RPP. |
Re: C2x question I can't see the Wraith hubs fitting onto the D44 axle since they're RC4WD and not Axial. The D44 is offered in 2 sizes from RC4WD...SCX width and Wraith width. If you use hubs that are compatible with Wraith axles, you will need to use Axial axles. You could reach out to Vanquish and RC4WD, to see if the hubs you're interested in from Vanquish will fit the D44's. Somebody else may chime in that has had experience with this set up. |
Re: C2x question Quote:
"thumbsup" I also have a C2X and nearly all the upgrades, though I have not installed them yet - it's on the back burner, building mine as an Overlanding-style truck (maybe). Posted a couple replies to your other posts regarding C2X D44 axle upgrades - I believe they only showed those axles mounted on a Wraith because the RC4WD D44 axles can be built either in SCX10-width (same width as a C2X) or Wraith-width. Pretty sure that the individual parts cannot be swapped from Wraith-specific axles, it's just that the width ends up the same so the entire axle could be used. My other replies to you are here: http://www.rccrawler.com/forum/rpp-h...ml#post6120391 http://www.rccrawler.com/forum/gener...ml#post6120393 |
Re: C2x question Quote:
|
Re: C2x question Here's another question for anyone that has a C2X. What size spur and pinion gears does the transmission have in it from the factory? Thanks in advance. |
Re: C2x question If you go to the C2X product page here: https://store.rc4wd.com/RC4WD-C2X-Cl...dy_p_7589.html You can then right click on the detail pictures, select "Open image in a new page" and the microscopic text will be larger so you can read all the specs. On most images you can then left click to make them absolutely huge..."thumbsup" I went ahead and did that and am including the link to the specific page that mentions the gearing here: https://www.rc4wd.com/ProductImages/...TR0042-3-8.jpg Also, if you just scroll down further on the C2X product page that I gave on the first link - it does list the gearing: "Ratios: Pinion/Spur 14/64 = 4.57:1" |
All times are GMT -6. The time now is 12:58 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com